User's Manual

36
Set up to Send SMS Messages
Before writing a new SMS message, check to see that the network’s SMS
message center number is stored in the phone.
If desired, you can select and change the following options.
The default settings are in place unless you change them.
The phone is now ready to send SMS messages.
Creating a Draft Message
A set of 10 message texts or templates, initially empty, may be used as
text templates when entering message text. Each of these texts can be
up to 50 characters in length. These draft messages are stored in the
phone draft text memory.
To create a draft text,
To edit an existing draft text,
1
Press . Select Messages.
2
Select Settings.
3
Select Message center.
If a number already appears, your service provider supplied
the number. Press OK . If empty, call your service provider.
Option Description Default
Validity
Time held at message center. 12 hrs,
1 day, 2 days or Maximum (defined by
service provider)
Maximum
Format
Selects format of message; Text, Voice,
Fax or Pager
Text
Paid reply
to
You may pay for the reply to a mes-
sage, if a reply is sent by the addressee
Off
Status
report to
Requests a status report. Must be
supported by your service provider
Off
1
Press . Select Messages.
2
Select Draft texts.
3
Choose a blank template [...] and press Edit .
4
Enter the message text. See Entering Text on page 27.
When finished, press OK .
1
Press . Select Messages.
2
Select Draft texts.
3
Select the draft text to modify and press Edit .
4
Edit the text. When finished, press OK .