User's Manual

51
TIME & DATE SETTING
To set the current time,
To set the current date,
• Time and date appear only while the phone is turned on. The time, the day
of the week and the date appear on the standby screen.
• An internal battery maintains the date and time setting for up to 3 hours
when the phone is turned off and without a battery, or with a completely
discharged battery attached. After this 3 hour period, you may need to
reset the clock when the phone is turned on again.
• An error message appears if you make an incorrect entry.
DEFAULT (FACTORY) SETTINGS
Use Default settings to return the phone settings back to the factory
settings. The Phone Book entries, phone lock code, or voice mail and SMS
message alert tones will not change. Only the features named below will
be affected.
1
Press . Select Settings. Select Phone settings.
2
Select Time & date.
3
Select Set time.
4
Enter the time using the number keys. Enter 0 (zero) first for
single digit hours and minutes. In the standby screen, the
zero before the hour digit will not appear. Use and to
move the cursor. Press OK to set.
5
Select am or pm. Press OK to set.
1
Press . Select Settings. Select Phone settings.
2
Select Time & date.
3
Select Set date.
4
Enter the date using the number keys. When entering date,
format is month/day/year. Enter 0 (zero) first for single digit
months and days. Enter all four digits of the year. Use and
to move the cursor. In the standby screen, the day of the
week and the date will appear.
5
Press OK to set.
1
Press . Select Settings. Select Phone settings.
2
Select Default settings.
3
Select Yes or No.