User's Manual

54
CALL FORWARDING NOTES
• If the ‘On no reply’ option is selected, you must enter a delay period of 5,
15, or 30 seconds.
• Call forwards for Line 1 and 2 must be set for each line. During call forward
set up, only the line currently selected is affected. To choose a call forward
for the other line, you must select this other line first (see Alternate Line
Service on page 42).
To cancel or check the status of individual call forwards,
To cancel all (multiple) call forwards,
>
This action cancels all voice forwards (for voice, faxes and data calls) for the line
currently in use. To cancel call forwards for the other line, first select this other
line (see Alternate Line Service on page 42).
CALLER LINE IDENTITY - SHOWING/HIDING YOUR PCS NUMBER
Most networks allow the Caller Line Identity feature (CLI) which shows
the incoming number (ID) while receiving a call. Select Receiving caller
ID to check if this is available from your network.
RECEIVING CALLER ID
To check if a network presents the caller ID of incoming calls,
To disable sending your own number on a call by call basis,
If your service provider has disabled sending your PCS number, then to show
your number on a call by call basis,
1
Press . Select Settings. Select Services.
2
Select Call forwarding.
3
Select the desired forward option and press .
4
Select Cancel or Status. Requesting displays.
The network will respond with current status.
1
Press . Select Settings. Select Services.
2
Select Call forwarding.
3
Select Cancel all.
4
Select Cancel. Requesting displays. The network will
confirm your request.
1
Press . Select Settings. Select Services.
2
Select Receiving caller ID. Requesting displays.
The network will return either Calling user ID
presentation available or presentation unavailable.
1
Enter #31# before the number you are calling.
1
Enter *31# before the number you are calling.