User's Manual

62
Alarm Clock
You can set a daily 'Power On' or a daily 'Reminder alarm.'
To set a time and turn on the alarm,
Standby screen with alarm icon
When alarm time arrives, an alarm sounds for up to to 1 minute. Alarm
clock! and vibrating bell icon appear and the LED light flashes red.
Silence turns off the alarm tone only. Valid. validates the alarm
(that is, turns off the alarm until the next day). To clear (turn off) the
alarm permanently, you must select Off in the Alarm clock menu. See
next page.
If the phone is off at alarm time, the phone will automatically turn on
and the alarm tone sounds and screen messages appear.
To use as a Reminder or Snooze Alarm,
Caution - Please remember to turn off the alarm feature in places
where cellular phone use is not permitted. You can also remove
the battery after turning off the phone. See the Safety warnings
on page 13.
1
Press . Select Office Tools.
2
Select Alarm clock (If a previous alarm time was entered,
then that time displays).
3
Select On. Enter the alarm time using 0 (zero) for single digit
hours or minutes. Press OK .
4
Select am or pm and press Select . Stored displays
briefly.
5 Press Back or to return to the standby screen.
icon appears on the top line of the screen.
Press Silence , or any other key (except Valid. ) to stop the
alarm tone. The alarm icon and Alarm clock! warning remain on
screen. The alarm rings again 3 minutes later.
or
Press Valid. to validate the alarm (that is, turn it off until the
next day).