Installation manual

4
5
3-2. Attach the drain pump
(1) Attach the drain pump 1 and drain socket as shown in Photo 3-4 using
four PTT screws 6.
* When attaching the drain socket, make sure that drain hose is
straight.
(2) Insert the rubber plug 2 into the drain port to close the port.
* To prevent water leakage, make sure that the rubber plug is pushed in
firmly as far as it will go.
Drain socket
Rubber plug 2
Drain pump assy 1
Inside unit
Outside unit
Drain socket
Frame
6PTT screw
3-3. Attaching the drain socket
As shown in the drawing below, insert the drain socket into the knockout
hole, and fix it with the PTT screw 6.
Photo 3-4
Fig.3-1
Insert the rubber plug straight.
Do not insert the rubber plub obliquely.