Specifications

47
PVFY-P-E00A SPECIFICATIONS
INDOOR UNITS
Model Name PVFY-P12E00A PVFY-P18E00A PVFY-P24E00A PVFY-P30E00A PVFY-P36E00A PVFY-P48E00A PVFY-P54E00A
Power Source 208/230V, 1-phase, 60Hz
Cooling Capacity Btu/h *1 12,000 18,000 24,000 30,000 36,000 48,000 54,000
Heating Capacity Btu/h *1 13,500 20,000 27,000 34,000 40,000 54,000 60,000
Power
Consumption
Cooling kW 0.17 / 0.17 0.28 / 0.28 0.26 / 0.26 0.38 / 0.38 0.32 / 0.32 0.36/0.36 0.41/0.41
Heating kW 0.17 / 0.17 0.28 / 0.28 0.26 / 0.26 0.38 / 0.38 0.32 / 0.32 0.36/0.36 0.41/0.41
Current
Cooling A 0.69 / 0.61 1.48 / 1.31 1.48 / 1.31 2.38 / 2.11 0.93 / 1.71 2.27/2.01 2.83/2.51
Heating A 0.69 / 0.61 1.48 / 1.31 1.48 / 1.31 2.38 / 2.11 0.93 / 1.71 2.27/2.01 2.83/2.51
Dimensions
Height Inches 42-3/4 48 58-3/4
Width Inches 17-3/4 21 24-1/2
Depth Inches 21 21-3/4
Net Weight Unit Pounds 88 98 108 115 120 160 168
Heat Exchanger Aluminum Fin and Copper Tube
Fan
Type x Qty. Forward Curved Blower x 1
Airflow Rate *2 CFM 243-320-376 385-481-531 483-636-705 637-800-886 784-954-1057 982-1268-1405 1114-1426-1576
External Static
Pressure
In. W.G. 0.30 - 0.50 (selectable)
Motor Type High Efficiency DC (Single-phase Induction Motor)
Refrigerant
Pipe
Dimensions
High Pressure
(Brazed)
Inches 1/4 1/4 3/8 3/8 3/8 3/8 3/8
Low Pressure
(Brazed)
Inches 1/2 1/2 5/8 5/8 5/8 5/8 5/8
Drain Pipe
Dimension
Primary
Inches
3/4 FPT
Secondary 3/4 FPT
Note: *1 Cooling/Heating capacity indicates the maximum value at operation under the following conditions:
Cooling: Indoor: 80˚F (27˚C) DB/67˚F (19˚C) WB; Outdoor: 95˚F (35˚C) DB
Heating: Indoor: 70˚F (21˚C) DB; Outdoor: 47˚F (8˚C) DB/43˚F (6˚C) WB
*2 Airflow rates are at (Low-Mid-High)
Ventilation Air: Providing sufficient ventilation air is an important part of every building design.
ASHRAE standard 62 provides the minimum ventilation air requirements. Also check local codes.
Specifications are subject to change.
Combine with any other CITY MULTI
indoor units on the same system.