Instruction manual

2 - 66
2 SYSTEM CONFIGURATION
(7) Connection of the battery
This section describes the battery specifications, handling precautions and
installation of the Q172DEX.
(a) Specifications
The specifications of the battery for memory back-up are shown in the table
below.
Battery Specifications
Model name
Item
A6BAT/MR-BAT
Classification
Manganese dioxide lithium primary battery
Normal voltage [V]
3.6
Nominal current [mAh]
1600
Storage life
5 years
Lithium content [g]
0.48
Applications
For backup absolute positioning data of the serial absolute
synchronous encoder
Exterior dimensions [mm(inch)]
16(0.63) × 30(1.18)
(Note) : The following points are changed for lithium metal batteries transportation by sea or air due to
Recommendations of the United Nations Rev. 15 and ICAO-TI 2009-2010 edition.
1) A package containing 24 cells or 12 batteries or less that are not contained in equipment are no
longer exempt from the following: attachment of a handling label, submission of the Shipper's
Declaration for Dangerous Goods, and a 1.2m (3.94ft.) drop test.
2) A battery handling label (size: 120 x 110mm (4.72 x 4.33inch)) is required. Emergency telephone
number must be filled out in the additional handling information of the Shipper's Declaration for
Dangerous Goods.
3) New label design containing battery illustration must be used (in air transportation only).
IF DAMAGED
CAUTION!
PACKAGE IF DAMAGED
DO NOT LOAD OR TRANSPORT
For more information,call
Lithium Metal batteries
[phone]
International
Fig.2.1 Example of Label with Battery Illustration
• Transportation precaution for customers
Documentations like the handling label in the specified design and the Shipper's Declaration for
Dangerous Goods are required for air and sea transportation. Please attach documentations like the
handling label in the specified design and the Shipper's Declaration for Dangerous Goods to the
package.
If you need the self-certification form for the battery safety test, contact Mitsubishi.
For more information, contact Mitsubishi.