Specifications

150 GETTING TO KNOW YOUR INSTRUMENT PANEL
transmission into PARK and run the engine at idle or slightly
higher until the light turns off.
4WD Over Temperature Warning Light
The icon will appear on the instrument panel display
to indicate overheating of the 4wd system. The mode
selected by the user will be applied as soon as the
system exits the overheating condition.
Yellow Indicator Lights
4WD Low Indicator Light — If Equipped
This light alerts the driver that the vehicle is in the
four-wheel drive LOW mode. The front and rear
driveshafts are mechanically locked together forcing
the front and rear wheels to rotate at the same speed. Low
range provides a greater gear reduction ratio to provide
increased torque at the wheels.
Refer to “Four-Wheel Drive” in “Starting And Operating”
for further information on four-wheel drive operation and
proper use.
4WD Lock Indicator Light
This light alerts the driver that the vehicle is in the
four-wheel drive LOCK mode. The front and rear
driveshafts are mechanically locked together,
forcing the front and rear wheels to rotate at the
same speed.
Refer to “Four-Wheel Drive” in “Starting And Operating”
for further information on four-wheel drive operation and
proper use.
WARNING!
If you continue operating the vehicle when the
Transmission Temperature Warning Light is illuminated
you could cause the fluid to boil over, come in contact
with hot engine or exhaust components and cause a fire.
CAUTION!
Continuous driving with the Transmission Temperature
Warning Light illuminated will eventually cause severe
transmission damage or transmission failure.
20_BV_OM_EN_US_t.book Page 150