Specifications

STARTING AND OPERATING 339
Exiting The Parking Space
NOTE:
The function does not work for exiting a perpendicular
parking space, but only exiting parallel parking spaces.
Activation
To activate this function, push the Active ParkSense hard
switch and then use the steering wheel arrow buttons to
select the Parallel Park Exit feature. After the selection, the
system activates and warns the driver on the instrument
cluster display about the operations that have to be carried
out to perform the maneuver correctly.
NOTE:
The following conditions must be met before the vehicle will
exit the parking space:
• The system must detect an obstacle within 16 - 35 inches
(40 - 90 cm) from the front bumper.
• The system must detect an obstacle within 16 - 59 inches
(40 - 150 cm) from the rear bumper.
If the detected obstacles are too close, or too far from the
vehicle (not detected by the sensors), then the maneuver is
cancelled and the message “Active ParkSense Cancelled
Complete Maneuver Manually” will appear in the instru-
ment cluster display.
If the maneuver is cancelled, it may be possible to reposi-
tion the vehicle inside the parking space and activate the
feature again.
5
20_BV_OM_EN_US_t.book Page 339