Specifications

STARTING AND OPERATING 349
To turn the LaneSense system off, push the LaneSense button
once (LED turns on).
NOTE:
The LaneSense system will retain the last system state on or
off from the last ignition cycle when the ignition is changed
to the RUN position.
LaneSense Warning Message
The LaneSense system will indicate the current lane drift
condition through the instrument cluster display.
Base Instrument Cluster Display — If Equipped
When the LaneSense system is on, the lane lines are gray
when both of the lane boundaries have not been detected
and the LaneSense telltale is solid white.
System On (Gray Lines/White Telltale)
Left Lane Departure — Only Left Lane Detected
• When the LaneSense system is on, the LaneSense telltale is
solid white when only the left lane marking has been
detected and the system is ready to provide visual warn-
ings in the instrument cluster display if an unintentional
lane departure occurs.
5
20_BV_OM_EN_US_t.book Page 349