User manual

EN-21

C. Installing the terminal cover

This projector includes a terminal cover. If necessary, install the terminal cover to the projector.

1. Fit two hooks of the terminal cover into the projector.

(a)

Viewing computer images (continued)

VIDEO IN S-VIDEO IN IN-1

(b)

You can use the buttons on the operation panel by

removing the door of the terminal cover.

3. Remove the door (b) of the terminal cover.

Important:

• Don’t carry the projector by the terminal cover.

• When the terminal cover is attached, remote control may

not work properly from behind the projector.

VIDEO IN S-VIDEO IN IN-1

2. Tighten the attachment screws (a) ﬁ rmly.