Manualshelf

User manual

ManualsBrandsMitsubishi Electric ManualsProjectorsXD221U XGA
21222324252627282930
EN-26
Advanced features (continued)
Supervising and controlling by computer
You can supervise and control the projector's operation using a personal computer via a LAN network.
• To supervise and control the projector, install the software "Projector-Control Device Installer*" contained in the attached CD-ROM. For the
installation procedure and usage of the software, see "User Manual for LAN Control Utility" contained in the attached CD-ROM.
*) Functions
• Setting of the projector's IP address
• Setting of password, display language, and LAN control
• PJLink
TM
certification setting (telnet function)
• Startup of the controlling / supervising tool (ProjectorView) using the Web browser
Major functions
ProjectorView
The controlling / supervising tool using the Web browser
PJLink
TM
This projector supports standard protocol PJLink
TM
for projector control and you can control and monitor projector's operations using the same
application among projectors of different models and different manufacturers.
Connection
• Use a straight-through category-5 cable for LAN connection.
• Don't touch the metal parts of the LAN connector and LAN cable because static electricity may be discharged from your body, causing damage
to the projector.
Using the User Manual
The User Manual for LAN Control Utility is prepared in the Portable Document Format (PDF) in the CD-ROM.
Opening the User Manual:
1. Load the CD-ROM into the CD-ROM drive.
2. Open CD-ROM "XD221U".
3. Double-click on "MANUAL_LAN.HTML" within the CD-ROM. A language selection list for the User Manual will be displayed.
4. Move the mouse pointer to the desired language and click.