A9GT-BUSSU type Bus connection interface module User’s Manual Thank you for purchasing the MELSEC-GOT Series. To ensure correct use of this equipment, please carefully read this manual prior to use.
z SAFETY PRECAUTIONS z (Always read before starting use) When using Mitsubishi equipment, thoroughly read this manual and the associated manuals introduced in the manual. Also pay careful attention to safety and handle the module properly. The instructions given this manual are concerned with this product. Refer to the User’s Manual of the CPU module in use for details on the safety instructions for the programmable logic controller system.
[INSTALLATION PRECAUTIONS] CAUTION z Use this module in the environment given in the general specifications of the GOT User's Manual. Not doing so can cause an electric shock, fire, malfunction or product damage or deterioration. z When installing this unit to the GOT, fit it to the connection interface of the GOT and tighten the mounting screws in the specified torque range. Undertightening can cause a drop, failure or malfunction.
Manuals The following manuals are relevant to this product. Refer to the following list and order the required manuals. Detailed Manuals Manual name A985GOT/A975GOT/A970GOT/A960GOT User’s Manual (Available as option) A950GOT/A951GOT/A953GOT/A956GOT User’s Manual (Available as option) Manual No. (Model code) SH-4005 (1DM099) SH-080018 (1DM103) Relevant Manuals For relevant manual, refer to the PDF manual stored within the drawing software.
1. Overview This User's Manual describes the A9GT-BUSSU type Bus connection interface module (hereinafter, A9GT-BUSSU). The A9GT-BUSSU is mounted on the A985GOT(-V)/A975GOT/A970GOT/A960GOT/ A956GOT/A956WGOT (hereinafter, GOT) to PLC system via a bus. The A9GT-BUSSU is a dedicated module for the GOT-A900 Series. The A9GT-BUSS is used with the following system: (1) One GOT is connected to one PLC CPU; or (2) Used with the last GOT when two or more GOTs are connected to one PLC CPU.
The applicable CPU and system configuration is the same as the conventional bus connection board. Refer to the GOT-A900 Series User's Manual (Connection System Manual) for the configuration of the bus connection system. The A9GT-BUSSU cannot be used together with the bus connection board. After opening the container, check that the following products are present. Description Quantity A9GT-BUSSU 1 2. Specification Item Specification I/O occupied points 32 points (I/O assignment: Special 32 points) 29.
No. (1) (2) (3) (4) (5) (6) (7) Name Description Used to set the extension number for GOT assignment. (Factory setting: 0) Extension number setting switch 1 to 7 : Extension number 8, 9, 0: Must not be used. Used to set the I/O slot number for GOT assignment. (Factory setting: 0) I/O slot setting switch 0 to 7: I/O slot number 8, 9 : Must not be used.
Warranty Mitsubishi will not be held liable for damage caused by factors found not to be the cause of Mitsubishi; machine damage or lost profits caused by faults in the Mitsubishi products; damage, secondary damage, accident compensation caused by special factors unpredictable by Mitsubishi; damages to products other than Mitsubishi products; and to other duties.
