User's Manual

[INSTALLATION PRECAUTIONS]
CAUTION
z Use this module in the environment given in the general specifications of the GOT
User's Manual.
Not doing so can cause an electric shock, fire, malfunction or product damage or
deterioration.
z When installing this unit to the GOT, fit it to the connection interface of the GOT
and tighten the mounting screws in the specified torque range.
Undertightening can cause a drop, failure or malfunction.
Overtightening can cause a drop, failure or malfunction due to GOT or screw
damage.
[WIRING PRECAUTIONS]
CAUTION
z Insert and fit the bus connection cable into the connector of the module to be
connected until it "clicks".
After fitting, check for an unsung fit.
Not doing so can cause a malfunction due to a connection fault.
[STARTUP AND MAINTENANCE PRECAUTIONS]
DANGER
z Do not change the switch setting during power-on.
Doing so can cause a malfunction.
z Before starting cleaning, always shut off GOT power externally in all phases.
Not doing so can cause a module failure or malfunction.
CAUTION
z Do not disassemble or modify any module.
This will cause failure, malfunction, injuries, or fire.
z Do not touch the conductive areas and electronic parts of this module directly.
Doing so can cause a module malfunction or failure.
z Always secure the cables connected to the module, e.g. run them in conduits or
clamp them.Not doing so can cause module or cable damage due to dangling,
moved or accidentally pulled cables or can cause a malfunction due to a cable
contact fault.
z Do not hold the cable part when unplugging any cable connected to the module.
Doing so can cause module or cable damage or a malfunction due to a cable
contact fault.
z Before handling the unit, touch a grounded metal or similar object to discharge the
static electricity from the human body.
Failure to do so may cause the unit to fail or mulfunction.
[DISPOSAL PRECAUTIONS]
CAUTION
z Dispose of this product as industrial waste.