- Mitsubishi Digital Electronics VCR User Manual

5. Features and functions

1 FRONT PANEL pages 22 - 23

Explains the buttons and terminals, etc. on the front panel.

2 INSIDE OF PRINTING UNIT page 23

Explains the installation of the ink cassette, print paper and battery inside the unit.

3 REAR PANEL page 24

Explains input/output terminals on the rear panel.

4 REMOTE CONTROL pages 25 - 26

Explains the functions of the buttons on the remote control.

1 FRONT PANEL

1 Remote terminal [REMOTE]

Connect the remote control of the printer in this terminal.

The remote control cannot be worked when connecting to the “REMOTE 1” terminal on the rear panel.

2 Power button [POWER]

Press this button to turn on and off the power. When power is turned on, the indicator lights up.

3 LCD display

Displays the set conditions of the input signal, and used to set various functions.

(The menus displayed on the monitor or LCD are used to set various settings.Refer to pages 37 - 64. )

4 LCD contrast control [LCD CONTRAST]

Adjusts the contrast of the LCD. Turn this control by pressing with a finger. Set the contrast so that you can see the

displayed characters easily.

5 Monitor button [MONITOR]

Switches the display on the monitor. When this button is pressed, the picture on the monitor screen switches between the

picture of the input signal (source image) and the memorized image.

OPEN

MEMORY

POWER

REMOTE

MEMORY

MONITOR