- Mitsubishi Digital Electronics VCR User Manual

6. Printing Procedures (Basic prints)

1 Setting print size (S/L)

1 Press the MENU button.

, “MAIN MENU” is displayed.

Main Menu

2.SIGNAL SET:PUSH[>]

Main Menu

4.PRINT :PUSH[>]

Print Menu

MODE :S

Print Menu

MODE :L

, Set the print size to “S” or “L” according to the ink sheet installed.

, The print size can be set on the menu screen displayed on the monitor or LCD.

, It is not necessary to set the size everytime you print unless the size of the ink sheet is changed.

2 Press the UP

or DOWN button to select “4. PRINT PUSH [ ] ]”

3 Press the RIGHT button.

, “Print Menu” is displayed.

, When the power is turned on, “MODE:S/L” is already selected in

“4. PRINT PUSH [ ] ]” at step 2. If other item is selected, press the

UP or DOWN button to select “MODE:S/L” .

4 Press the RIGHT

or LEFT button to select “S” or “L” in the

“MODE” .