- Mitsubishi Digital Electronics VCR User Manual

45
7. Setting the functions (Main menu)
1 COLOR ADJ Adjusting the color of the image
, With this menu, the color of the source image and memorized image can be adjusted.
, This menu is also displayed by pressing color ADJUST
COLOR
ADJUST
button.
BRT (Bright )
Function
Adjust the brightness of printing image.
CONT (Contrast )
Function Adjust the contrast of printing image
R-SUB ( Red-subcontrast)
Funciton
Adjust the red-subcontrast of printing image
B-SUB ( Blue-subcontrast)
Function Adjust the blue-subcontrast of printing image
, The each function and setting area is as follows.
display adjusting - 64 adjusting area + 63
B R T Brightness Darker ............................. Brighter
display adjusting - 32 adjusting area + 31
CONT Contrast Less contrast ....................... More contrast
R-SUB Red-subcontrast Add cyan ........................... Add red
B-SUB Blue-subcontrast Add yellow ......................... Add blue
CENTER
Function Each function setting value is initialized with the “COLOR ADJ” .
When CENTER is set to “ON” , the setting value of BRT, CONT, R-SUB and
B-SUB is reset to “0”.
ANALOG ADJ (Analog Adjust )
Funciton
Image adjustment menu of analog input signal is displayed.
When pressing RIGHT button , “7.ANALOG ADJ” menu is displayed.