- Mitsubishi Digital Electronics VCR User Manual

48
7. Setting the functions (Main menu)
3 ADDITIONAL Special print setting
STROBE
Function
This function is to repeat storing the image in the memory according to selected the time interval.
When MULTI is set to “ON” , the image is stored in order of image number .
When MULTI is set to “OFF” , every one image is stored in the memory.
• The image is stored in the memory every time as shown below.
, 1/13 sec → 1/5 sec → 1/2.5 sec → 1 sec → 2 sec → 5 sec → 10 sec → 30 sec ............ every second
, 1 min → 2 min → 5min → 10min → 30 min ..................................................................... every minutes
, 1hr .......................................................................................................................................... every hour
, Pressing the LEFT
button to select the interval.
, The image is automatically printed after storing the image in the memory when “MEM&PRINT” function
is set to “ON” on “MEMORY SW MENU” → “KEY SETTING” menu.
Note: The monitor display may not be correctly shown when setting the time interval to lower value.
MULTI
Function Switching the multi-image print
ON................ Multi-image prints are available
OFF .............. Multi-image prints are not available
Set the number of images (2,2s,4,16 image) in a print.
Set the number of images in a print and the size with MULTI, MODE, IMAGES, and SEPARATE menus.
Refer to pages 65-80 for multi-image print.
MODE
Function
Setting the print mode
SAME ......................... Print the image of the same scenes in a print.
DIFF ( Different ) ...... Print the image of the different scenes in a print.
PHOTO ..................... Portrait-like print
• When “MULTI” is set to “ON”, this function is displayed.
IMAGES
Function
Selecting the number of image
“IMAGES” menu is changed depending on selecting the “MODE” function.
• When “MULTI” is set to “ON” , this function is displayed.
When selecting “SAME” or “DIFF” in the “MODE” function
2 ..............2-images in a print (When printing on a L size paper, the image can be printed fully in width.
But the top and bottom of printed image will be lacked.)
2s ............2-images in a print (When printing on a L size paper, the image can be printed without lack.
But each of printed image size is reduced.)
4 ..............4-images in a print
16 ............16-images in a print
When selecting “PHOTO” in the “MODE” menu
CARD .....16-multi images in a print (1.5 x 2.0cm size image)
3*4 ..........4-multi images in a print (3.0 x 4.0cm size image)
5*5 ..........2-multi images in a print (5.0 x 5.0cm size image)