- Mitsubishi Digital Electronics VCR User Manual

7. Setting the functions (Main menu)

SEPARATE

Function

Switching the white frame

Separate the each image in multi-image print with white frame

ON................ White frame print

OFF .............. Normal print

• When “MULTI” is set to “ON”, this function is displayed.

4 PRINT Print setting 1

MODE

Function

Selecting the paper size

Selecting the paper size depending on the installed the ink sheet.

S................... S-size ink-sheet ( model: PK700S)

L ................... L-size ink-sheet ( model: PK700L)

• When installing L-size ink sheet or monochrome ink sheet and selecting “S” , the image can be

printed on S-size. Also the number of prints is as follows.

• When S size ink sheet is set, S-size printing is made even if “L” is selected in print mode.

GRAD (Gradation )

Function

Change the gamma curve of the image

Selecting the gamma curve from 3 types

NML ............. Normal

DEEP ........... Deep

ECHO........... The gamma curve is set according to medical equipment.

, If changing the setting value of gamma in ECHO, the value is able to change in “ECHO GAMMA

ADJ” on “MEMORY SW MENU” → “PRINT SETTING” menu.

The setting value in the “ECHO GAMMA ADJ” on the print setting menu is applied to “ECHO” .

Refer to page 63.

APT

Function Adjusting image outline.

This function is to control aperture and to reinforce or soften the contour.

SOFT [ S ] ............. Soften the contour

NML [ N ] ............. Do not perform APT

HARD [ H1 ] ............. Reinforce the contour

HARD [ H2 ] ............. More reinforce the contour

mode

S size print

(200 sheet)

S size print

(125 sheet)

L size print

(125 sheet)

Ink

sheet

S size print

(200 sheet)