- Mitsubishi Digital Electronics VCR User Manual

7. Setting the functions (Making a comment)

TOP/BOTTOM/LEFT/RIGHT

Function Setting the print area

By adjusting print area, the image size to be printed can be limited. Printing area adjustment can be

operated with the setting menu on the screen.

TOP ............. Top adjustment (setting area -16 to +134 )

BOTTOM...... Bottom adjustment (setting area -134 to +16)

LEFT ............ Left adjustment (setting area -34 to +270)

RIGHT ......... Right adjustment (setting area -270 to +34)

, Select “OK” on “CHANGE : OK/CANCEL” and press the SET

SET

button, then, “6.SYSTEM” menu is displayed.

1 Making a comment

Select the making a comment menu “COMMENT”.

This functions are operated with the remote control using the menus displayed on the monitor screen.

Explanation

, Listed below are the four comment displays.

A ) Comment display block ..................... Inputted letter is displayed , Setting the input position

B ) Character block ................................. Inputting the character block, Selecting the letter from character block

C ) Editing or selecting block .................. Caps letter, small caps letter selecting, selecting the special letter mode,

Insert the space, delete a letter or clear the comment

D ) CHANGE : OK/CANCEL ................. A block to fix the set comment :

When fixing the comment, select “OK”.

When the comment is not set and inputting or changing a letter or changing,

select “CANCEL”.

, Press the MENU

button to select the desired block.

, The desired function is set on the block.

SHIFT