- Mitsubishi Digital Electronics VCR User Manual

59
7. Setting the functions (Memory SW menu)
SETTING FUNCTIONS
2 MEMORY SW MENU
When pressing the POWER button while pressing the MEMORY button on the front panel with the POWER turned
off the MEMORY SW MENU is displayed.
(e.g.) Monitor display: MEMORY SW MENU → KEY SET → KEY LOCK
1 Item and setting are as shown below .
1.TIME ADJ ........................ Date / Present time
2. KEY SET ....................... Invalid the buttons' function, Memory button function
3. SIGNAL ADJ..................
Signal polarity, Signal level , Sync.signal, Signal timing , Horizontal signal starting position,
Color of printing image
4. PRINT SET .................... Printing direction , Printing speed, Paper cutting position , Gamma setting
5. SYSTEM SET ................ Initializing the user setting , Baud rate, RS-232C command type, Response command
Remote busy logic, Inform the number of remaining paper
CHANGE : OK / CANCEL/ INIT...... Complete, cancel or initialize the setting of the above function
CHANGE : OK /CANCEL/ INIT
This menu is shown in the lowest position on the “MEMORY SW MENU”.
Selecting “OK”, “CANCEL”. “INIT ( Initialize)” on the setting value of the menu 1-5.
Close the menu 1- 5 and normal display is shown.
1 Press the SET
SET
button.
, “CHANGE” is indicated in blue.
2 Press the shift or button to select “OK” , “CANCEL” or “INIT” .
, In case of changing a comment , select “CANCEL”
OK ..................... Fix the setting and normal display is shown.
CANCEL ............ Cancel the setting and MEMORY SW menu display is shown.
INIT .................... Initialize the setting of MEMORY SW menu.
3 Press the SET
SET
button.
, The selected command is executed.