- Mitsubishi Digital Electronics VCR User Manual

60
7. Setting the functions (Memory SW menu)
1 TIME ADJ Setting the day and present time
TIME ADJ ( Time Adjust )
Function Setting the day and present time.
Refer to pages 11-13 for setting.
2 KEY SET Setting the buttons' function
KEY LOCK
Function The function on the remote control buttons and all of the buttons of the unit except POWER button are
not available.
ON ..........The function on the remote control buttons except MEMORY, PRINT, MONITOR, MEMORY
PAGE are not available.
OFF ........All of the buttons on the remote control are available.
MEM & PRN (Memory and Print )
Function
When pressing the MEMORY button, the image is automatically printed after the image is stored in the
memory. In the case of multi-image of different scenes, printing is executed after the last image is
stored in the memory.
ON ..........Storing the image and automatically printing
OFF ........The MEMORY button functions individually. The image memorized without being printed.
MEM & STOP (Memory and Stop)
Function
When setting to “ON”, the next image is not overlaid in the memory after the last image is stored in the
memory .
ON ..........The image is not overlaid in the memory.
OFF ........The next image is stored in the memory.
When setting to "ON ", the image is stored in the memory again by pressing the PRINT or CLEAR
button.
MEM & MON ( Memory and Monitor )
Function Switching the monitor display to the source image or memory image.
ON ..........Display the memory image.
OFF ........Display the source image.
PRINT & CLR (Print and Clear )
Function
After printing, the printed memory image is cleared.
ON ..........Clear the printed memory image.
OFF ........Does not clear the printed memory image.
Note: Do not set the number of prints two or more. Because the memorized image will clear after printing the
first sheet and there will be no print on the paper.