- Mitsubishi Digital Electronics VCR User Manual

7. Setting the functions (Memory SW menu)

CLEAR KEY ( Memory and Clear )

Function Setting the CLEAR button function on the remote control.

ONE ........Pressing the CLEAR button on the remote control, the

memorized image being selected is cleared.

ALL .........Pressing the CLEAR button on the remote control, all of the stored

memorized images are cleared.

3 SIGNAL ADJ Signal setting display

IN SYNC

Function Selecting the level of input sync.signal.

0.3 V ............ Composite Sync. of 0.3Vp-p level

TTL. SOG..... Composite Sync. of TTL level or Sync. On. G

Set the function according to inputting signal.

OUT SYNC

Function

Selecting the level of output Composite Sync. signal of RGB signal.

0.3V ........0.3 Vp-p

TTL .........TTL level

Set the function according to connecting monitor.

SYNC

Function

Select the polarity of output H+V Sync. of RGB signal.

POSI ............. Positive polarity

NEGA ............ Negative polarity

Set the polarity according to the signal of the connecting device.

Refer to the manual of connecting device.

RGB SOG OUT

Function Select the sync. signal of RGB analog output terminal.

OFF............ Composite Sync. signal output

ON.............. Sync. On.Green + Composite Sync. signal output

This is the function to switch between sending and not sending Sync. On Green signal on the output

signal. When set to “ON”, Sync. On Green and Composite Sync. signals are output. When set to “OFF”,

only Composite Sync. signal is output.

Set the function according to connecting monitor.