AUTO-SCANNING WITH DIGITAL CONTROL COLOR DISPLAY MONITOR USER’S GUIDE For future reference, record the serial number of your display monitor in the space below: SERIAL No. The serial number is located on the rear cover of the monitor. Internet Home Page: http://www.mitsubishi-electric.com.au/ ® Supplying Windows 95/98/2000 INF File download service, new product information, etc.
- ii -
RADIO INTERFERENCE REGULATIONS STATEMENT FOR U.S.A. ENGLISH This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Below you will find a brief summary of the environmental requirements met by this product. The complete environmental criteria document may be ordered from: TCO Development SE-114 94 Stockholm, Sweden Fax: +46 8 782 92 07 Email (Internet): development@tco.se Current information regarding TCO’99 approved and labelled products may also be obtained via the Internet, using the address: http://www.tco-info.
CONTENTS 2 CAUTION 1.1 Features ...................................................... 2 1.2 Internal Preset Memory Capability .............. 3 The power cord provided with this monitor is designed for safety and must be used with a properly grounded outlet to avoid possible electrical shock. 1.3 Power Management Function ..................... 3 1.4 DDC ............................................................ 3 1.5 Location Considerations .............................
1 INTRODUCTION Congratulations on your purchase of this high resolution colour monitor. We designed this monitor to provide you with years of reliable trouble-free operation. This guide tells you how to connect, adjust and care for your monitor. This guide also provides technical specifications and instructions for troubleshooting any basic problems you may experience with your monitor. 1.
1.2 1.5 Internal Preset Memory Capability When setting up and using the monitor, keep the following in mind: • For optimum viewing, avoid placing the monitor against a bright background or where sunlight or other light sources may reflect on the display area of the monitor. Place the monitor just below eye level. • Place the monitor away from strong magnetic or electromagnetic fields, such as high capacity transformers, electric motors, large current power lines, steel pillars, etc....
1.7 1.9 Quick Operation Chart Unpacking To summarize the steps in connecting your computer with the colour monitor and setting the necessary controls and switches, refer to the chart below. After you unpack the box you should have all of the items indicated in Figure 1. Save the box and packing materials in case you transport the monitor. 2 1 Connect the colour monitor and computer with the necessary cords and cables. See Section 3. INSTALLATION AND CONNECTION Turn on the colour monitor.
2 PART NAME ENGLISH 2.1 Control Names See Figures 3 and 4 for the location of the user controls, indicator and connectors. Each part is identified by number and is described individually. REAR FRONT 4 FPM Figure 4 − OSD OFF ＋ Figure 3 2.2 Function 1. POWER SWITCH: A push-on / push-off switch for AC power. 2. POWER-ON INDICATOR: This indicator illuminates green when AC power is on, and illuminates orange when the monitor is in the power management modes. 3.
3 INSTALLATION AND CONNECTION 3.2.2 Connecting to An Apple Macintosh Computer On the back of the monitor two kinds of plug-in connections are provided: AC power connector for the AC input, DB915P connector for video signal input. 3.1 Figure 6 shows the signal cable and AD-A205 Adapter (option) to the video port in an Apple Macintosh.
4 How to adjust the screen The monitor has an OSD(On Screen Display) function. The following procedure shows how to adjust the screen using the OSD function. Group icon Main Menu Sub Menu FPM OSD OFF − ＋ If you don't press a button during the time set by "OSD TURN OFF", the OSD will turn off automatically. -7- ENGLISH 4.
4.2 Adjustment Items X: Available Group Icon Press the Plus Button Press the Minus Button Item Icon A B C Item To decrease the contrast. To increase the contrast. X X X BRIGHT To decrease the brightness. To increase the brightness. X X X COLOR To select preferable display color mode. And, to adjust the color balance at the selected color mode. CONTRAST NOTE When selecting mode "sRGB", "COLOR TEMPERATURE", "CONTRAST" and "BRIGHT" are unavailable.
X: Available Item Icon Press the Plus Button Press the Minus Button Item A B C CORNER PURITY(TL) To adjust the purity condition on the top-left corner. X X X CORNER PURITY(TR) To adjust the purity condition on the top-right corner. X X X CORNER PURITY(BL) To adjust the purity condition on the bottom-left corner. X X X CORNER PURITY(BR) To adjust the purity condition on the bottom-right corner. X X X MOIRE CANCEL LEVEL To decrease the level of the moire-lear wave.
5 TROUBLESHOOTING ITEMS TO CHECK PROBLEM No picture Before calling your Authorized Product Support, please check that the items below are properly connected or set. In case of using a non-standard signal, please check the pin assignments and the signal timing of your computer with the specification outlined in Section 6. SPECIFICATIONS.
ITEMS TO CHECK LOCATION Two fine horizontal lines are visible on the screen. • The 2 very faint thin lines across the screen are normal. They are caused by the aperture grille stabilization filaments(Damper Wires) which are required for all aperture grille CRTs’. Aperture Grille Shadow of Damper Wires Electrn Gun Damper Wires Aperture Grille Type Shadow of Damper Wires A buzzing sound when power on. • A brief vibration or hum sound that is heard just after power up is normal.
6 SPECIFICATIONS Size CRT 50cm/19" (458mm/18" Viewable Image Size) Mask type Aperture grille Gun In-line Deflection angle 90° Phosphors Red, Green, Blue EBU (medium short persistence) Aperture grille pitch 0.25-0.27mm (variable) Face Plate Anti-glare, Anti-reflection and Anti-static film Focusing method Dynamic Beam Forming (DBF) INPUT SIGNAL Video Sync 0.7V analog RGB Separate H, V sync., or Composite sync SIGNAL INTERFACE Input Connectors Input Impedance DB9-15P 75Ω (video), 2.
7 Optional Macintosh Adapter AD-A205 settings (2) The AD-A205 Macintosh Adapter(option) allows you to take an advantage of the built in video capabilities of your Macintosh computer with the monitor. (1) Set the dip switches of the adapter, before connecting to the computer. Set the dip switches according to the following chart. By using the following chart, you can choose a main resolution, quickly. If you wish to use other resolutions, refer to the "ADA205 Mac Adapter Setting Chart” on the next page.
- 14 - X X 3,4 Macintosh 3,4 1,2 2,4 1,2 3,4 2,4 2,3 2,4 2,3 3,4 2,4 3,4 1,2,3,4 1,2,3,4 1,2,3,4 2,4 1,2,6 1,2,6 1,2,6 1,2,6 1,2,6 1,2,6 3,4 1,2,6 1,2,6 1,2,6 1,2,6 3,4 3,4 1,2 3,4 3,4 1,2 1,2,6 1,2 3,4 1,2,6 1,2 3,4 Centris 610 650 1,2,6 1,2,6 3,4 1,2,6 1,2,6 1,2,6 3,4 3,4 3,4 1,2,6 3,4 6100 6100AV 8100 7100AV 6100AV 8100AV 7100AV AV 8100AV Video Card DRAM (DB-15) Video Port (HDI-45) 6410 Workgroup 8100 Server VRAM 6420 8150 Video Card 9150 (DB-15) Performa
8 WARRANTY The benefits conferred by this Warranty are in addition to all other rights and remedies in respect of the product which the consumer has under the Trade Practices Act and similar State and Territory Laws. PC and GRAPHIC MONITORS MITSUBISHI 3 YEAR WARRANTY Please complete and keep with original purchase docket.
b) c) d) e) 3. a) b) c) the product is damaged by the use of a consumable which is not supplied by Mitsubishi Electric Australia or its recognised retailer and which consumable is not of an equivalent standard and quality. the product is damaged by exhausted, leaking or used batteries or fails to function correctly as a result of the use of such batteries.
ENGLISH IMPORTANT NOTICE This recycle symbol may appear on packaging material or components of this product. Cd This symbol is a mandatory requirement in some countries and does not necessarily indicate that the material can be recycled in Australia. The Plastic Identification Code (numbers 1 to 7 in a “chasing arrows triangle”) may also appear on packaging material or components for this product.
CP871C214A10 Declaration of Conformity - United States only Product Name: Type: Brand Name: 19 in. (50cm) Color Display Monitor NFK9905STTFW MITSUBISHI This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
