- Mitsubishi Digital Electronics DVR User Manual

ManualsBrandsMitsubishi Electronics ManualsDVRDX-TL2500U

••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••

<RECORD SETTINGS> (continued)

ALARM

NO PPS GRADE A-PPS A-GRADE

1.875P STD 1.875P STD

NEXT PAGE SHUTTLE<<:BACK

<RECORD SETTING> 1/2

Camera selection during alarm recording

<RECORD SETTING> 2/2

CAUTION : For <ESTD REC>,

see

“Continuous recording time table”, pages 92, 93.

Appears when “PARTITION” is set.

<RECORD SETTING> ALARM

NO PPS GRADE A-PPS A-GRADE

1.875P STD 1.875P STD

PRE ALARM REC ( S ) S

SHUTTLE<<:BACK

<ESTD REC> D H M %

The storage area in MAIN HDD set in “PARTI-

TION” is displayed with the percentage(%) and the

recordable time of that storage area is displayed in

“<ESTD REC>”.

The <RECORD SETTING> screen consists of 2

pages. The second page is displayed by turning the

JOG dial moving the cursor to “NEXT PAGE”, and

turn the SHUTTLE ring clockwise.

9. Turn the JOG dial and move the cursor to camera selection

item for alarm recording and turn the SHUTTLE ring clockwise.

• The background of setting turns red and flashes.

• Setting ( default : “ALARM” )

“ALARM” : Alarm recording is performed for only the cameras

set for alarm recording and inputted with alarm signals. When

there is input of alarm signals from multiple cameras, alarm

recording is performed for all cameras containing alarm signals.

“ALARM PLUS” : Recording is performed in the frame speed

set in “A-PPS” for the camera inputted with alarm signals

during normal recording. All other cameras will be recording

in the normal frame intervals.

10. Display the desired item to set and turn the SHUTTLE

ring clockwise.

• The setting is confirmed and flashing stops.

11. (When setting the recording intervals and recording picture

quality for normal recording

• • •

)

Turn the JOG dial to select the desired camera number and

turn the SHUTTLE ring clockwise twice.

• The background of the “PPS” display changes to red and flashes.

• Setting of “PPS” ( default : “1.875P” )

“3.75P”, “1.875P”, “1.25P”, “0.938P”, “0.75P”, “0.625P”,

“0.375P”, “0.25P”, “0.125P”, “0.063P”, “0.031P”, “0.016P”, “-

- - - - -”

“- - - - - -” : Recording cannot be performed with camera set

to this setting.

Pressing the WARNING RESET button while the

cursor is on the left of the desired camera number

changes that camera’s “PPS” and “A-PPS” to “- - - - - -”.

For details concerning normal recording settings,

see “Setting the recording interval and recording

picture quality for normal recording” pages 27, 28.

12. Display the desired item to set and turn the SHUTTLE

ring clockwise.

• The setting is confirmed and flashing stops.

13. Turn the JOG dial clockwise to reverse display the

“GRADE” setting and turn the SHUTTLE ring clockwise.

• The background of the “GRADE” display changes to red

and flashes.

• Setting of “GRADE” ( default : “STD” )

“SUPER”, “HIGH”, “STD”(STANDARD), “BASIC”, “LONG”

14. Display the desired item to set and turn the SHUTTLE

ring clockwise.

• The setting is confirmed and flashing stops.

15. (When setting recording intervals and recording picture

quality for alarm recording • • • )

Repeat steps 11 ~ 14 and select desired settings for “A-PPS”

and “A-GRADE” as well.

16. When the setting is complete, turn the SHUTTLE ring

counterclockwise.

• The cursor moves to the camera number directly to the left.

17. When continuing with other camera number, turn the JOG

dial to move the cursor to the desired camera number and

repeat steps 11 ~ 16 for settings.

18. When done with all settings, turn the SHUTTLE ring

counterclockwise or press the SET UP button to exit.

■ PRE ALARM REC

The pre-alarm recording can be set.

563P

STD

563P

STD

PRE ALARM REC ( S ) S

SHUTTLE<<:BACK

<ESTD REC> D H M

Setting ( default : “0S” )

“0S”, “1S”, “2S”, • • • • • ,“58S”, “59S”, “60S”, “90S”,

“120S”, “150S”, “180S”

When “0S” is selected, the pre-alarm recording

is inoperable.

The maximum pre-alarm recordable time is dis-

played in “( )”. Beware that when you set the pre-

alarm recording time longer than the maximum, the

settings will turn red. Set the time within the record-

ing time limit, so that the display returns to white. (If

the time is set beyond the limit, Pre-Alarm record-

ing time is not changed.)

1. Press the SET UP button

}

}

<RECORD

SETTINGS>

}

Select “PRE ALARM REC” in the <RECORD

SETTING> 2/2 screen, and display the desired setting.

2. Turn the SHUTTLE ring counterclockwise or press the SET

UP button to exit.