- Mitsubishi Digital Electronics DVR User Manual

99
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
Specifications
Specifications
Rated Power Supply: AC 100-240V 50/60Hz
Rated Input: 0.65 - 0.3A (100-240V)
Color System: NTSC type color system.
Operating Temperature: 41°F-104°F (5°C to 40°C).
Relative Humidity: Max.80(%)
Altitude: Max.2000(m)
Dimensions: 425(Width) x 375(Depth) x 118(Height)(mm).
Weight: 8.2kg
Recording System Digital recording method using WAVELET compression.
Sampling 13.5MHz
Data Compression WAVELET
Compression Unit Field
Resolution 684 x 240
Recording Device 240GB HDD
Video Input: 16 Input BNC-Connector: 1.0 V(p-p), 75 ohms.
Monitor Output: S-Connector: Y-Signal: 1.0 V(p-p), 75 ohms.
C-Signal: 0.286 V(p-p), 75 ohms.
2 Output BNC-Connector: 1.0 V(p-p), 75 ohms.
RCA-Pinplug: 1.0 V(p-p), 75 ohms.
Throughout Output: 16 Output BNC-Connector: 1.0 V(p-p), 75 ohms.
Audio Input: RCA-Pinplug: 308 mV(rms), 50 kohms.
Audio Output: 2 Output RCA-Pinplug: 308 mV(rms), 1 kohms.
Microphone Input: Ø3.5mm stereo minijack: 0.346 mV(rms), 600 ohms.
Timer Program: 8 programs-Daily start and stop time for one week x 3set.
Memory Backup: Lasts for more than 1 month.
CONNECTORS
ALARM IN(1-16) Input: Terminal for starting alarm recording.
CLOCK ADJ Input: Terminal for adjusting clock.
REC Input: Terminal for start recording.
EMERGENCY Input: Terminal for start emergency recording.
GND: Terminal for ground.
MODE OUT(1-5) Output: Terminal for indication of recording selected mode.
DC 5V OUT Output: Terminal for DC 5V OUT. Max. Drive current 30mA DC.
CALL OUT/CALL OUT GND: Terminal for external warning device.
RS-485/RS-422 Terminal for operations of pan, tilt and zoom of a dome camera.
Rating:
MODE OUT(1-5) Active: “Low” Level. Max. Drive current 7mA DC.
Non active: Open. Max. Voltage +24V DC.
ALARM IN / CLOCK ADJ / Active: When terminals are short-circuited
REC/EMERGENCY or “Low” Level voltage is applied.
Non active: Open.
CALL OUT / Active: ON. Max. Drive current 7mA DC.
CALL OUT GND Non active: Open. Max. Voltage +24V DC.
RS-232C RS-232C (D-SUB 9pin) connector for connection with personal computer.
SCSI SCSI2 (Half pitch 50 pin ) connector.
ETHERNET Connector form: RJ-45
Physical interface: 10BASE-T
Accessories
AC power cord 1 (The supplied power cord is used for 120V only. Never connect to any outlet or
power supply having a different voltage or frequency.)
COMPACT FLASH slot cover (mounted on unit) 1
Compact Flash Card recording format Original format (FSM2)
CD-R/RW recording format Original format (FSM2)
Weight and dimensions shown are approximate.
Design and specifications are subject to change without notice.