DX-TL910U Digital Video Recorder Simple Set-Up Guide Copyright 2004 – Mitsubishi Digital Electronics America, Inc.
DX-TL910U Quick Reference Guide This Quick Reference Guide is designed to help you get quickly acquainted with your Mitsubishi DX-TL910U Digital Video Recorder (DVR). This guide will also help you HOW TO program and perform commonly used functions. For additional information please reference the DX-TL910U Installation and Operations Manual. Features: Easy to Use 60PPS Copy to CFC or VHS PC25 or Web Browser Duplex Operation 5 Quality Grades Password Protection Per Camera Settings.
First Time Power-UP (AUTO SETUP): When the DVR is taken out of the box and turned on for the first time an AUTO SETUP program will guide you trough setting the DVR’s Time and Date Settings and Performing AUTO SETUP. Ensure all cameras being used are connected to the DVR and are turned ON. After entering Time and Date, PERFORM AUTO SETUP YES or NO menu will be displayed. If you choose YES, the DVR will guide you through CAMERA Check and AUTO RECORDING SETTINGS.
How to SECTION: A. RECORD B. MONITOR VIEWING C. PLAYBACK D. SEARCH E. COPY F. ALARM SETTING G. MOTION SETTING H. RECORDING & ALARM REC. SETTINGS I. TIMER REC J. INITIAL SETUP INFORMTION (HDD REPEAT) K. NETWORK SETTINGS L. ESTABLESHING A NETWORK CONNECTION A. Recording: 1. Once the DVR is installed with all of the cameras connected, and the various settings in the DVR are set (Time and Date, how each camera is to record and other important menu settings), a.
• • 2. The display will turn red and flash. This indicates the data may be edited. The format is YEAR MONTH DAY HOUR MINUTES SECONDS. Turn the JOG dial to select MONTH and turn the SHUTTLE ring clockwise. The background of the setting item changes to red and flashes. With the JOG, change to needed month and accept the change by turning the SHUTTLE CW. 3. Turn the JOG dial to DAY you want to search by. Same as above, use the JOG/SHUTTLE to make changes and accept the changes.
F. Alarm Settings: 1. From the Main Menu select RECORD SETTING and select ALARM SETTING 2. Go to TRIGGER and select the type being used. a. EXT = External/input at rear terminal is needed to activate an alarm b. MD&EXT = Motion & External input are needed to triggers an Alarm c. MD/EXT = Either Motion or External input will triggers an Alarm d. MD = Alarm REC. is initiated when Motion is detected by active input. e.
I. Timer Record Setting (if being used): 1. From the Main Menu, select TIMER PROGRAM SETTING. Select Pattern P1 (P1-3 support different schedules, selected Pattern will be used by DVR as default). Select SET and enter time to record. For DW enter day of week to record where DAY is for every day, SPL is days of week set by user at bottom of the screen and HOL is for Holiday which is entered in Holiday Setting Menu of the Timer Program Setting menu screen. 2.
L. Establishing a Network Connection – The DVR can be connected by WEB BROWSER or DX-PC25U software. • WEB Browser – Launch your Web Browser and at the ADDRESS LINE input the DVRs IP address. 1. USER ID (default) is “root” (no “” and lower case) 2. PASSWORD (default) is “admin000” (no “” and lower case) also 000 are zeros not letter o. 3. Click on LOGIN button. Up to 10 users can log in at one time. 3. Select LIVE, PLAYBACK or ….. LOGOUT to EXIT. (up to 10 users can connect at once). 4.
• DX-PC25U Application Software – This software comes with each DVR in a CD form. Load the software to as many PC’s that will need access to the DVR. Up to 5 users can connect at one time. It is recommended that one user also be the Security Administrator who will setup and provide specific level access to other users. Launch the Software to establish a connection. 1. 2. 3. 4. 5. 6. 7. When the Network box appears select the DVR and click on connect.
