- Mitsubishi Digital Electronics DVR User Manual

Copyright 2004 – Mitsubishi Digital Electronics America, Inc. – All Rights Reserved 2
DX-TL910U Quick Reference Guide
This Quick Reference Guide is designed to help you get quickly acquainted with your Mitsubishi DX-TL910U Digital Video
Recorder (DVR). This guide will also help you HOW TO program and perform commonly used functions. For additional
information please reference the DX-TL910U Installation and Operations
Manual.
Features:
Easy to Use Duplex Operation Per Camera Settings.
60PPS 5 Quality Grades Covert Camera
Copy to CFC or VHS Password Protection Network Support via DX-
PC25 or Web Browser
Front View:
1. Power 2. Access Indicator 3. Camera Sequence
4. Timer Button 5. REC/STOP 6. Shuttle Ring Figure 1
7. Jog Dial 8. Split/Sequence 9. Zoom
10. Pre-Alarm Indicator 11. M-Detect Indicator 12. Emergency Ind.
13. Lock 14. Lock Button 15. Video/Audio out
16. Compact Flash Slot 17. Copy Button 18. Alarm Interrupt
19. Warning Reset 20. SETUP 21. Search
22. Stop/Pause/Rev. Play & Play
Figure 2
Rear View:
1. Main Power Switch 2. Video Out 3. Camera In
4. Camera Out 5. A/C Power Socket 6. Audio In/Out
7. Ground 8. MIC In 9. Reset
10. Alarm In 11. I/O Terminals 12. RS-232C
13. Network Connector
Jog/Shuttle Usage:
The Jog/Shuttle is used for two types of operations
1. Playback Features – When Playing back, turning the Shuttle (outside
ring) Clock Wise (Forward) or Counter Clock Wise (Reverse) will
change the playback speed. When in Pause mode, the Shuttle is also
Figure 3
used to set the desired playback speed. From Pause turn the Shuttle to the desired Playback speed and press Pause to
hold the speed. Press Play to exit.
2. Programming of DVR – The Jog and Shuttle are used to navigate, select, change
and exit the various On Screen menu and sub-menu’s.
IMPORTANT INFORMTION:
• The Jog (inside ring) when turned CW or CCW is used to move the OSD cursor
Up/Down/Across selecting various functions. The Jog is also used to make a
change within the selected field (blinking in RED).
• The Shuttle (outside ring) is used to select, accept and exit the various functions. When a change is accepted, the
field turns from blinking RED to WHITE background.
a. Turning the Shuttle CW, selects the function (field goes from White background to blinking in RED).
b. To accept the change, turn the Shuttle CW, and the field goes from blinking RED back to White.
c. Turn the Shuttle CCW to EXIT and go back through the various menu layers.
Power Up:
This is a two step process, first, press the Main Power Switch ON (rear panel just above the Power cord), and from the front
of the unit press the Power Button (front #1). The unit will go through a series of power-up self test for about 20 seconds.