- Mitsubishi Digital Electronics VCR User Manual

Chapter1:GettingtoKnowYourVCR FluorescentDisplay(cont.)
/
AM PM SUMO TU WETH
2
,!
FR SAD
3 45 6
7 8 9
Q
®
channel display
This displays the cable channel, broadcast
channel, or input you have selected. The
cable tuning light (m) will light up when
your VCR is receiving cable broadcasts.
PerfecTape® light (PT)
This will flash when the PerfecTape ®test
is in progress. It will stay illuminated
when the test is completed.
® play and record light and cassette
status symbol
These light up when the VCR is playing a
tape or recording. The symbol (["-]) will
light up when a tape i=_in the VCR. The
dashes in the center ol!the symbol simu-
late the movement of the tape when
playing and recording
Overviewofthe RemoteControl
Q
®
®
®
power button (POWER)
Press this button to turn the VCR on or
off. If you have programmed the VCR to
record, you need to turn the VCR off.
volume controls (VOLUME)
Press the bottom half of this button
(indicated by the down arrow) to lower the
volume of the TV; press the top half
(indicated by the up arrow) to raise the
volume.
function button (AUDIO/VIDEO)
Press this button to select the VCR's audio
and video settings to be adjusted.
VCRfI_ button (VCRITV)
Press this button to switch between the
VCR's picture and the TV's tuner. When
you select "VCR', you change channels on
the VCR; when you select "TV', you
change channels on the TV.
®
,
number buttons
Use these buttons to select TV stations or
to set Quick searching: (CM skip) time.
quick program button
(QUICK PROGRAM)
This button allows you to program your
VCR more quickly and easily. When you
press _his button, you will immediately
see the "Program to record" screen, where
you can begin prograr_ming your VCR to
record.
record button (REC,)
Press this button to sl;art recording. When
recording, you can use the button to add a
manual index mark.
8