- Mitsubishi Digital Electronics VCR User Manual

_i CHAPTER THREE

OperatingYourVCR

SettingUpYourVCRforthe

Now that you've completed your antenna, VCR, and TV connec-

tions, you're ready to start enjoying your equipment. To get the

most satisfaction out of your VCR, you shoulc[ carefully read the

two sections, "Setting Up Your VCR for the First Time" and

"Viewing the Picture Coming from Your VCR." Then you can start

exploring what your new VCR can do.

In this chapter, you'll learn:

$ SettingUp YourVCR for the FirstTime

$ Usingthe RemoteControl

Viewingthe PictureComingfrom YourVCR

$ Loadingand UnloadingTapes

PlayingaTape

Selectingthe On-screenLanguage

$ Usingthe Menusto Programthe VCRto ReceiveTV Channels

Settingthe Clock

0 Usingthe AudioandVideo Functions

$ Recording

FirstTime

It's important that your VCR is set up correctly before you try to

use it. If you carefully read this section, you will avoid confusion

later and get the most out of operating your _ystem. This section

teaches you about:

• Setting up your VCR if you are using a TV equipped with

Audio and Video Inputs (Modern TV), and

• Setting up your VCR if you are using a TV without Audio

and Video Inputs (Older TV).

Before you begin, you should:

• have completed your antenna, VCR, and TV connections.

Setting up yourVCR if youare usingaTV equippedwith Audio

and VideoInputs(ModernTV)

Turn on your TV and switch it to the correct external input.

(For most Mitsubishi TVs, this means pressing the TV's

INPUT button until you see the words "]_,xt-l" or "Input-l" on

the screen.) If you do not have a Mitsu.bishi TV, please refer to

your TV instruction book for this procedare.

Turn the VCR oll by pre,_sing the POW!_.;R button.