- Mitsubishi Digital Electronics VCR User Manual

O PresstheAUDIO/VIDEObuttonontheremotecontrolto see

thefunctionmenu.

_Important:

VCR

REC speed SP

_-ADJUST to select

Press the AUDIO/VIDEO button repeatedly until the function

you want to adjust appears.

Press the ADJUST buttons on the remot._ to adjust the

setting. The functions will disappear if'you do not press any

buttons for 5 seconds.

The function menu does not appear when the other VCR menus

are displayed; or during special effects playback. The recording

speed (REC speed) and tape functions do not appear during

playback. The PerfecTape ®function is displayed only when a tape

with its erasure tab intact is loaded and the VCR is stopped.

Recording

Your new VCR offers a wide variety of recording options that take

full advantage of our advanced electronics. This section tells you

about the following recording; procedures:

• Recording a current broadcast,

• Programming your VCR to record,

• Using One-Touch Recording (OTR),

• Using One Key Programming,

• Using Quick Program, and

• Notes about programmed recording.

Recordingacurrentbroadcast

Beforeyoubegin,youneedtoknowhow:

• to view the picture coming from your VCR. (See page 22.)

To record a TV program that is currently playing:

O Load a tape with its erasure tab intact it,to the VCR. If you

have not yet recorded on this tape, the VCR will test the tape

with the PerfecTape ®feature. (For more information on this

feature, please see page 49.)

If you have not already done so, set the speed at which you

would like to record. (See "Selecting and adjusting the audio

and video functions" on page 34.)