- Mitsubishi Digital Electronics VCR User Manual

will moveyoubackwards.Then,usetheADJUSTbuttonsto

changethesetting.

DImportant: If youpresstheCANCELbuttonwhilethe channel number is

flashing, you will cancel the entire program.

UsingOne-Touch Recording(OTR)

One-Touch Recording (also called OTR) is a way to begin record-

ing immediately, but have your VCR stop recording and turn off

automatically after your show is over.

Before you begin, you need to know how:

• to view the picture coming from your VCR. (See page 22.)

To use OTR:

O Load a tape with its erasure tab intact :in'm the VCR. If you

have not yet recorded on this tape, the VCR will test the tape

with the PerfecTape ®feature. (For more information on this

feature, please see page 49.)

O If you have not already done so, set the speed at which you

would like to record. (See "Selecting and ,_djusting the audio

and video functions" on page 34.)

Set the VCR's input to tuner. To do this, t:ress the INPUT

button on the remote until the channel number shows ,on-

screen or on the front panel display.

Use the CHANNEL buttons on the remote control or on the

front panel to select the channel you would like to record.

I _ L° °J_" I

If you are using a cable box, select channel 3 or 4 on the VCR,

and change the channel on the cable box. Additionally, if you

are using an A/B switch, remember to set _he switch to the

correct position.

Press the REC/OTR button, on the front :panel twice. The first

time you press the button, recording will begin. The second

time you press the button, 30 minutes is added to the OTR

timer, which is displayed o:n the front panel.

Press the REC/OTR button for each 30 minutes you want to

add to the OTR timer, up to 4 hours. If you press the button

10 times, you will see the word "End" on the front panel

display. The VCR will record until the end of the tape. If you

press the button an. eleventh time, the VCR will resume

normal recording.

The OTR timer will begin to count down. When it reaches zero,

the VCR will stop recording and turn off. If you have previously

programmed your VCR to record, the VCR will be ready to record

what you've programmed. If the end of the tape is reached before

OTR is finished, the VCR will stop and the power will turn eft.