- Mitsubishi Digital Electronics VCR User Manual
Chapter4: UsingtheAdvancedFeatures SearchingTechniques(cont.)
VCR
Repeat play
_-AD3UST to select
usingrepeatplayback
You can play back a section of tape over and over using the
following procedure. The tape will play until the next index mark,
rewind to the previous index mark, and resume playing. If there
is only one index mark on the tape, then the VCR will play or
rewind to that mark and resume playback. If there is no i:ndex
mark, the entire cassette will repeat.
O Press the AUDIO/VIDEO button on the remote control to
display the function menu. Press the AUDIO/VIDEO ]button
until the repeat playback function appea:rs.
O Press the ADJUST + button to start the playback.
When the VCR encounters the next mark (or the end ,of the
tape), it will automatically rewind to tile previous mark and
begin playback.
The VCR will also search for a blank section of tape. If the VCR
encounters any section longer than four seconds in length, the
repeat playback will begin.
Press the PLAY/STOP button to cance] the repeat.
UsingtheAdvancedOptions
You can make some optional setup choices. 3_his section explains:
• Using the auto power saving (auto-off}, and
• Setting the RF converter.
Usingthe auto powersaving(auto-off)
Your choices are:
_i'_rosram to record
First Time Set-Up
4{:@:_'AD3UST _Oilseiect
_-----MENUto
® e-ENTER to enter
When the Auto Power Save fimture is turned on, the VCR will
automatically turn off after remaining idle fcr 30 minutes. If a
control, such as a menu function or channel selection, is used or if
there is a tape playing or being recorded, the VCR will remain on.
To use the auto power saving:
O Press the MENU button on the remote control. The %rCR
Main Menu" appears on your TV.
Cuszomize choices :!i:i
Video mute (ON )
(OFF)
RF converter (ON )
PerfecTape (AUTO)
4[@]m--ADJUST toselec_':i
_---'-MENU _o So backi_ _
•_-ENTER _o chansel;ili
e
e
o
Use the ADJUST buttons to move the cu:rsor next to "Custom-
ize choices" and press th_ ENTER butto,l.
The "Customize choices" :menu will appear. Use the ADJUST
buttons to select "Auto power save." Then, press the ENTER
button to set to ON.
Press the MENU button once to return to the "VCR Main
Menu;" press the MENU button again to turn off the menus.
54