- Mitsubishi Digital Electronics VCR User Manual

_>Important:
Your choices 8re:
_Program to record
First Time Set-Up
_.ADJUSTII_0selec_
QVideo mute (ON )
Auto power save (OFF)
(ON)
0 PerfecTape (AUTO)
_ADJUST _o seiect
e-----MENU _o so _aCk ......
® e--ENTER _o chanse .....
_>Important:
When you are viewing broadcast stations r_h:rough the VCR, the
words "3 minutes->Power off" will appear o_ the TV screen three
minutes before the VCR power turns off. The display will count
down the number of minutes until the VCR turns off. If you want
to continue using the VCR, load a cassette o:: press any of the
buttons.
Settingthe RFconverter
If you are using an older TV without audio and video inputs, the
RF converter will need to be set to ON. The setting "RF con-
verter" of the "Customize choices" menu is preset by the fhctory to
ON. If you are using a modern TV with both Audio and Video
inputs, you will need to set the RF converter to OFF.
To set the RF converter:
O Press the MENU button on the remote control. The "_'CR
Main Menu" appears on your TV.
Use the ADJUST button,s on the remote to select "Customize
choices". Press the ENTER button.
The "Customize choices" menu will appear. Use the ADJUST
buttons to select "RF converter". Then, press the ENTER
button to set the RF converter to ON or OFF.
_]} Press the MENU button once to return to the "VCR Main
Menu"; press the MENU button a second time to turn off the
menus.
If the "RF converter" is set to ON, you don't :]eed to press the
VCRiTV button to play a tape or to use VCR menus. The "VCR"
light will automatically light up when you press the PLAY/STOP
button or the MENU button.
55