User's Manual

10. MELSECNET/10 CONNECTION (PLC TO PLC NETWORK)
10.1 Connectable Model List
10 - 5
9
MELSECNET/H CONNECTION (PLC TO PLC NETWORK)
10
MELSECNET/10 CONNECTION (PLC TO PLC NETWORK)
11
CC-Link IE CONTROLLER NETWORK CONNECTION
12
CC-Link IE FIELD NETWORK CONNECTION
13
CC-Link CONNECTION (INTELLIGENT DEVICE STATION)
14
CC-Link CONNECTION (Via G4)
15
INVERTER CONNECTION
16
SERVO AMPLIFIER CONNECTION
(Continued to next page)
*1 When using SV13, SV22 or SV43, use the motion controller CPU on which any of the following main OS version is installed.
• SW6RN-SV13Q : 00H or later
• SW6RN-SV22Q : 00H or later
• SW6RN-SV43Q : 00B or later
*2 Use main modules with the following product numbers.
• Q172CPU: Product number N******* or later
• Q173CPU: Product number M******* or later
*3 Only the first step can be used on the extension base unit (Q52B/Q55B).
Series Model name Clock
Communication
type
Refer to
Motion
controller
CPU
(Q Series)
Q172CPU
*1*2
MELSECNET/10
10.2
Q173CPU
*1*2
Q172CPUN
*1
Q173CPUN
*1
Q172HCPU
Q173HCPU
Q172DCPU
Q173DCPU
Q172DCPU-S1
Q173DCPU-S1
Q172DSCPU
Q173DSCPU
Q170MCPU
*3
MR-MQ100 - -
Motion
controller
CPU
(A Series)
A273UCPU
MELSECNET/10
10.2
A273UHCPU
A273UHCPU-S3
A373UCPU
A373UCPU-S3
- -
A171SCPU
A171SCPU-S3
A171SCPU-S3N
A171SHCPU
A171SHCPUN
A172SHCPU
A172SHCPUN
A173UHCPU
MELSECNET/10
10.2
A173UHCPU-S1
MELSEC-WS
WS0-CPU0
- -
WS0-CPU1
MELSECNET/H
remote I/O
station
QJ72LP25-25
- -QJ72LP25G
QJ72BR15
CC-Link IE
Field Network
head module
LJ72GF15-T2 - -
CC-Link IE
Field Network
Ethernet
adapter module
NZ2GF-ETB - -
CNC C70 Q173NCCPU
MELSECNET/10
10.2
Robot
controller
CRnQ-700
(Q172DRCPU)
MELSECNET/10
10.2