3D Adapter MODEL 3DC-1000 OWNER’S GUIDE For questions: - Visit our website at www.mitsubishi-tv.com. - E-mail us at MDEAservice@mdea.com. - Call Consumer Relations at 800-332-2119 for operational or connection assistance. To order replacement or additional remote controls or other accessories, visit our website at www.mitsuparts.com or call 800-553-7278.
Important Safety Instructions 1) 2) 3) 4) 5) 6) 7) Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 8) Only use attachments/accessories specified by the manufacturer. 9) Refer all servicing to qualified service personnel.
Features • • • • Converts 3D video originating in several popular formats to checkerboard format for display on your 3D or 3D-ready Mitsubishi television. Processes side-by-side, top-and-bottom, and frame-packing 3D (e.g., Blu-ray 3D) formats. Passes 2D images unaltered for normal display. Includes two pairs of active-shutter 3D glasses and matching IR emitter.
3D Adapter Battery Installation The remote control requires one CR2025 lithium battery. To remove the battery, press on the retaining clip. 1 2 Emitter 1. Remove the cover. 2. Insert the battery, positive side up. Be sure the retaining clip holds the battery securely. 3. Reinstall the cover. 3D STATUS IR Sensor POWER 3D MODE Adapter 3D MODE POWER POWER Controls and Indicators Remote Control POWER Light Lit when power is on. 3D STATUS Light Lit during 3D signal processing.
Connecting the Adapter Connecting a Single 3D Video Source • • • Power off all devices prior to connecting the Adapter. If the device was in use prior to adding the Adapter, use the same TV input if possible. On an 833 series TV, the input must be named Game. Step 1. HDMI OUT 3D GLASSES EMITTER OUT AC power adapter (provided) 5V DC 2A 3D GLASSES EMITTER IN HDMI IN 5V DC 2A Step 2.
Using the Adapter 1. Position the emitter where there will be a clear path to the 3D glasses. 2. Power on the TV, the 3D video device, and the 3D glasses. Note: The 3D video device must be powered on before the 3D Adapter can power on. 3. If the 3D Adapter does not power on automatically when you power 4. on the 3D video device, press the POWER button. If the New Input Found screen displays, assign a name to the input. If you have an 833 series TV, name the input Game. 5.
3D Glasses 3D active LCD shutter glasses enable you to view 3D images when used with the matching IR emitter and a compatible 3D-ready TV. Power Button Battery Cover LCD Shutter Lens LED Indicator Emitter LED Lit when TV is in 3D mode. Battery Installation • • • Each pair of glasses requires one CR2025 lithium battery. A continuously blinking red LED indicates low battery power. Install a new battery. See lithium-battery safety information at the front of this booklet. Open the cover.
Using the 3D Glasses 3D Glasses Operation 1. Turn on 3D Mode in the TV and 3D source device. 2. Press the POWER button on the glasses to turn on the glasses. 3. When the 3D program is complete, turn off 3D mode in the TV and 3D source device and turn off the glasses. On Operating Range Be from 5 to 20 feet away. Press POWER button. The red LED will light for three seconds. 5 ft. 20 ft. Off 50° 50° Hold POWER button for about two seconds. Red LED will blink three times.
Cleaning Instructions • • • • To avoid scratching the glasses, use only standard glasses lens cleaning cloth, microfiber cloth, or a soft non-scratching cloth such as cotton flannel. Make sure the cloth is clean and free of any foreign material that may scratch the glasses. Cloths pre-moistened with cleaning solutions designed specifically for eye glasses can be used, however, do not spray solutions directly on the glasses. DO NOT spray any cleaner directly onto the any surface of the glasses.
3D Safety Requirements • 3D Glasses are NOT designed as sunglasses or safety glasses and do not provide protection. 3D glasses should be worn only when viewing 3D material. • Do not wear the wireless glasses in any situations that require unimpaired visual perception. • Children under the age of 5 should not view 3D programming. Under normal conditions, 3D viewing is safe for your movies or games. Some people may experience discomfort, however.
Mitsubishi Model 3DC-1000 3D Starter Kit Limited Warranty MITSUBISHI DIGITAL ELECTRONICS AMERICA, INC. (“MDEA”) warrants as follows to the original purchaser of this 3D Starter Kit from an authorized MITSUBISHI Audio/Video Dealer, should the adapter, glasses, IR emitter, remote control or included accessories prove defective by reasons arising from improper workmanship and/or material: a. Length of Warranty.
service center; physical abuse to or misuse of the product (including any failure to carry out any maintenance as described in the Owner’s Guide or any product damaged by excessive physical or electrical stress); any products that have had a serial number or any part thereof altered, defaced or removed; product use in any manner contrary to the Owner’s Guide; freight damage; or any damage caused by acts of God or other factors beyond the reasonable control of MDEA, such as power surge damage caused by el
3DC-1000 © 2010 Mitsubishi Digital Electronics America, Inc.