DLP ® HIGH-DEFINITION TELEVISION MODELS WD-57833 WD-65833 WD-73833 OWNER’S GUIDE • • • • For questions: - Visit our website at www.mitsubishi-tv.com. - E-mail us at MDEAservice@mdea.com. - Call Consumer Relations at 800-332-2119. For information on System Reset, please see the back cover. To order replacement or additional remote controls, lamp cartridges, or Owner’s Guides, visit our website at www.mitsuparts.com or call 800-553-7278.
For Your Records Record the model number, serial number, and purchase date of your TV. The model and serial numbers are on the back of the TV. Refer to this page when requesting assistance with the TV. MODEL NUMBER SERIAL NUMBER PURCHASE DATE RETAILER NAME LOCATION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Contents Important Information About Your TV General Warnings and Cautions, Notes on Installation and Operation. . . . . . . . . . . . Important Safeguards.. . . . . . . . . . . . . . . 1 Television Overview Package Contents. . . . . . . . Special Features of Your TV. TV Front Panel.. . . . . . . . . . TV Back Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Important Information About Your TV Installation Notes Cleaning Recommendations Stand Requirement Mitsubishi does not design, manufacture or sell matching bases for 833 series model televisions (WD-57833, WD-65833, WD-73833). When selecting a stand, base or other furniture to support the TV, please make sure it is designed with the appropriate dimensions for stability and to support the TV’s total weight as well as the weight of any additional equipment you plan to store.
Important Safeguards Please read the following safeguards for your TV and retain for future reference. Always follow all warnings and instructions marked on the television. 1. Read, Retain and Follow All Instructions. Read all safety and operating instructions before operating the TV. Retain the safety and operating instructions for future reference. Follow all operating and use instructions. 2. Heed Warnings. Adhere to all warnings on the appliance and in the operating instructions. 3. Cleaning.
1 Television Overview Package Contents High-Definition Video Inputs Please take a moment to review the following list of items to ensure that you have received everything. 1. 2. 3. 4. 5. 6. 7. 8. Remote Control Two AA Batteries Owner’s Guide Quick Reference Guide Quick Connect Guide Product Registration Card Four-Ended IR Emitter TV Guide On Screen® Interactive Program Guide User’s Manual 9. Cleaning Cloth for Glossy Surfaces (see instructions under “Cleaning Recommendations”).
1. Television Overview NetCommand for HDMI Devices Some newer HDMI devices may be compatible with the TV’s NetCommand for HDMI feature. Compatible devices can receive control signals through the HDMI connection. The TV’s remote control may be able to operate some functions of these devices without any further setup. TV Guide On Screen® Interactive Program Guide System An eight-day on-screen program guide for cable and over-the-air reception.
1. Television Overview Front-Panel Indicators Off Steady On Slow Blinking Fast Blinking POWER/TIMER Indicator LED Color TV Condition Additional Information None TV is powered off. Normal operation. Green TV is powered on. Normal operation. Green TV powered off, auto-on timer is set. Normal operation. TV can be turned on at any time. Green 1. TV just plugged into AC outlet. Wait approximately one minute for blinking to stop before turning 2. AC just restored after power failure.
1.
1. Television Overview TV Back Panel, continued 7. HDMI™ Inputs 9. DVI/PC AUDIO INPUT The HDMI 1.3 (High Definition Multimedia Interface) supports uncompressed standard and high-definition digital video formats and PCM digital stereo audio format. Use the DVI/PC AUDIO INPUT when connecting a DVI device to one of the TV’s HDMI inputs using a DVI-toHDMI cable. These jacks allow you to send left and right analog audio from your computer or other DVI device to the TV.
2 11 TV Set-Up Guidelines for Setting Up and Using Your New Widescreen TV Getting Started TV Operation 1. Review the important safety, installation, and operating information at the beginning of this book. 2. Choose a location for your TV. • Allow at least four inches of space on all sides of the TV to help prevent overheating. Overheating may cause premature failure of the TV as well as shortened lamp life. • Avoid locations where light may reflect off the screen.
2. TV Setup • • Parental Locks. Restrict TV viewing by program rating, by channel, or by time of day. You can also disable the front-panel buttons if you have small children. See the Lock > Parent menu, the Lock > Front Panel menu, and Setup > Edit > Lock. Video Settings. Change video adjustments to get the best picture for your viewing conditions. See “AV Menu.” When You First Power On the TV Choosing a Language for Menus 1. Power on the TV for the first time. 2.
2. TV Setup Initial TV Setup, continued Change the Menu Language Choose to display on-screen menus in either English or Spanish (Español). 5. When memorization is complete you can: • Press MENU once to return to the top row of icons. • Press MENU again to return to the Main menu. • Press EXIT to watch TV. After channels have been memorized: • To tune to memorized channels, press CH / while watching TV on the ANT 1 or ANT 2 inputs.
2. TV Setup Setting Up TV Inputs, continued 1. See chapter 3, “TV Connections,” for recommendations on connecting your devices. 2. Connect your devices to the TV, making note of which TV input is used for each device. The TV and the devices can be either on or off when connecting. perform NetCommand IR “learning” to add functions. 4 More About Auto Input Sensing • • • • First select a device type. Next perform IR “learning.” Auto Input Sensing screen for most device types. 3.
2. TV Setup Using the TV with a Personal Computer Connecting a Computer to the TV Y Pb Pr (480i/480p/720p/1080i) Y Use one of the connection methods listed below based on your computer’s video output. Computer Video Output Digital DVI 3D GLASSES EMITTER DVI-to-HDMI cable or an HDMI cable with an HDMI-toDVI adapter ANT 2 / AUX ANT 1 / MAIN HDMI HDMI-to-HDMI cable S-VIDEO VIDEO SXGA / 720p / 1080p )%.
2. TV Setup Using the TV with a Personal Computer Computer Video Adjustments Tip: Set the computer’s screen saver to display a pattern after several minutes of inactivity. This acts as a reminder that the TV is powered on and the lamp is in use. The lamp is in use whenever the TV is powered on, even if the screen appears dark. 1. Power on the computer if it is not already on. 2. Select PC from the Input Selection menu.
3 TV Connections 17 Before you Begin Auto Input Sensing Sound Quality The TV’s Auto Input Sensing feature automatically recognizes most connections and prompts you to identify the type of device connected. See chapter 2, “TV Setup,” for more on Auto Input Sensing. For best surround sound audio quality, route audio signals from the input device directly to your A/V receiver or sound system whenever possible.
3. TV Connections HDMI Device (Cable Box, Satellite Receiver, DVD Player, or Other Device) Standard Cable Box, Satellite Receiver, or Other Device with S-Video Required: HDMI-to-HDMI cable. Required: S-Video cable and left/right analog stereo audio cables. Connect an HDMI cable from the TV back panel to the HDMI device output. HDMI devices provide video and audio through the single cable. 1. Mitsubishi recommends you use category 2 HDMI cables to connect HDMI 1.3 source devices.
3. TV Connections Wall Outlet Cable (no cable box) Antennas with Separate UHF and VHF Leads It is very important to connect the incoming cable for your primary viewing source to ANT 1/MAIN. Required: UHF/VHF combiner 1. 1. Connect the primary incoming coaxial lead cable to ANT 1/MAIN on the TV back panel. 2. For an optional secondary antenna source, connect an antenna (or cable) to ANT 2/AUX. Connect the UHF and VHF antenna leads to the UHF/VHF combiner. 2.
3. TV Connections DVD Player with Component Video Component video cables and analog audio cables are required. 1. Connect the component video cables from Y Pb Pr VIDEO OUT on the back of the DVD player to the COMPONENT jacks on the TV back panel, matching the green, blue, and red colored connections. 2. Connect left (white) and right (red) stereo audio cables from AUDIO OUT on the back of the DVD player to COMPONENT AUDIO L (MONO) and AUDIO R on the TV back panel. $0.
3. TV Connections VCR to an Antenna or Wall Outlet Cable Optional Perform these two additional steps to: • Use the TV Guide On Screen recording feature • Record high-definition digital channels converted to analog standard-definition video and analog stereo audio 6. Connect left (white) and right (red) audio cables from AUDIO in on the VCR to RECORD OUTPUT AUDIO LEFT and AUDIO RIGHT on the TV back panel. If your VCR is mono (non-stereo), connect only the white (left) cable. 7.
3. TV Connections VCR to a Cable Box (Audio & Video) Required: Two-way RF splitter, three coaxial cables, right and left audio cables, S-Video or composite video cable, plus component or S-Video cables and audio cables required to connect the TV to the cable box. 1. Connect the incoming cable to IN on the RF splitter. 2. Connect one coaxial cable from OUT on the RF splitter to CABLE IN on the cable box. 3. Connect one coaxial cable from OUT on the RF splitter to ANT 1/MAIN on the TV back panel.
3. TV Connections A/V Receiver (Sound System) Most setups require either a digital audio cable or analog stereo audio cables. The TV makes all audio available in digital and analog formats: Analog audio coming into the TV is available as output in digital stereo format on the DIGITAL AUDIO OUT jack. Digital incoming audio is available as analog output on the AVR AUDIO OUTPUT/AUDIO L (MONO) and AUDIO R jacks.
3. TV Connections Camcorder Inputs on the front of the TV offer the most convenient way to connect a camcorder. Use jacks on the TV front panel to connect a camcorder Component Y Pb Pr Video Connection Required: Analog stereo audio and component video cables supplied with the camcorder. 1. Connect component video cables from VIDEO OUT on the camcorder to the TV’s INPUT 3 COMPONENT jacks on the front panel. 2.
3. TV Connections IEEE 1394 Devices Compatible IEEE 1394 Devices Compatible A/V devices include some, but not all, cable boxes, D-VHS VCRs, A/V discs, camcorders, and future products. Some devices may have IEEE 1394 connectors but are not compatible with the TV. Areas of compatibility to consider are: 1. Digital Video Signals This TV can decode HDV (high-definition MPEG2 resolution) as provided by cable boxes and some camcorders. The TV cannot decode DV (standard-definition resolution video).
3. TV Connections IEEE 1394 Devices, continued Tips for Connecting IEEE 1394 Devices IEEE 1394 Camcorders • • Control Functions. Connect the camcorder to an IEEE 1394 jack on the rear of the TV and test using the TV’s remote control to operate the camcorder. If your model does not operate properly, use the camcorder’s control buttons instead. • MPEG Camcorders.
4 TV Operation and Features Choosing a Viewing Source Sleep Timer The Sleep Timer turns the TV off after the length of time you set. Input Selection menu Choose a viewing source from the Input Selection menu. The current TV input appears as a full-color icon in this menu. 1. Press INPUT to display the Input Selection menu. If there are only two inputs to the TV, INPUT switches between them without displaying the menu. 2. Highlight an input icon using . 3.
4. TV Operation and Features Remote Control 1. POWER: Turns TV power on and off. 2. Slide Switch: Selects the A/V device to be operated by the remote control. Set the slide switch to TV for operation of the TV, NetCommand-controlled devices, and IEEE 1394 devices. Control of additional devices requires programing (see Appendix D, “Programming the Remote Control.” 3. SLEEP: Sets the TV to turn off within 2 hours. 4.
4. TV Operation and Features Remote Control, continued 23. F1–F4 For devices under NetCommand control: Perform NetCommand “Learning” to assign your choice of functions to the F1–F4 keys. For devices operating independently of NetCommand: The F1–F4 keys work like the A, B, C, D buttons on some cable boxes, satellite receivers, and DVD players. Program the remote control for your equipment and test the keys. See Appendix D, “Programming the Remote Control.” 25.
4. TV Operation and Features ChannelView Channel Listings ChannelView screen ChannelView™ shows memorized channels on ANT 1 or ANT 2. It displays channel names and program information as sent by broadcasters or your local cable service provider and may be incomplete. No program information is displayed for analog channels. An analog channel name is displayed only if you assigned a name in the Setup > Edit menu.
4. TV Operation and Features Status Display Ant 1 On-screen status display sample information 2 3 7-1 KABC-HD 11 HD 16:9 Standard TV-PG 10 Stereo 12 Fav1 English 14 Tuesday 9:10 PM Sleep 30 min 16 PLAY 6 Press the INFO key to see the on-screen status display. The most common displays are shown here. Seldom or never do all the status indicators appear at the same time. 1 18 MUTE 7 00:05 4 Monday Night Football St. Louis vs.
4. TV Operation and Features Fav (Favorite Channels) Use the six Fav channel banks to store groups of your favorite channels from ANT 1 and ANT 2. You can set up a Fav channel bank for each of your favorite program types or set up a bank for each TV user. You may prefer to perform Fav channel setup from a menu. See chapter 5, “TV Menu Settings,” and the Setup > Edit options.
4. TV Operation and Features 33 TV Signals and Display Formats This is a widescreen TV, also known as a 16:9 TV. This shape reflects the new types of images available from HDTV and many DVDs. There are still many older style narrow-screen images (called 4:3 aspect ratio) you will encounter. While there is no perfect solution for displaying a squarish, narrower image on a wide screen, Mitsubishi offers several display formats from which you can choose.
4. TV Operation and Features TV Display Formats See descriptions on the preceding page.
4. TV Operation and Features Split Screen Split Screen allows you to view pictures from two different sources at the same time. Split Screen is available when you have video sources connected to the TV in addition to connections on ANT 1 or ANT 2. Operation of Split Screen Split Screen Operations Instructions Turn Split Screen on or off Press SPLIT. Switch the sound source between the main Press or . The speaker icon (right) appears briefly to indipicture (left) and sub-picture (right).
4. TV Operation and Features Viewing Camera Files JPEG Photos and the USB Photo Port 1. Connect your digital camera or USB drive to the USB Photo port on the front of the TV. If using a camera, power it on and set it to playback mode. The USB Photo menu displays while files are still being read. Wait until you see the completion message on screen before continuing. L-AUDIO-R Note: VIDEO/Y Pb Pr I N P U T 3 USB Some manufacturers’ devices may be incompatible with the TV.
4. TV Operation and Features Slide Show USB Photo Menu Compatible Picture Files Use these keys during the slide show: • Keys for JPEG Picture Slide Show Begin or resume slide show playback Pause or resume playback while in automatic advance mode. or ENTER FORMAT Advance to the next slide. Go to the previous slide. • Rotate the slide clockwise in 90˚ increments. • Stop slide show and display the USB Photo menu. INFO Display status for the viewing device and current image.
5 TV Menu Settings Main Menu Press MENU on the remote control to open the Main menu. Icon Menu Name and Description Record Menu Set up or cancel NetCommand-controlled recordings. See chapter 6, “NetCommand.” AV Menu Customize picture and sound settings. Turn closed captions on and off; customize Captions Menu caption displays. Setup Menu Perform basic TV setup.
5. TV Menu Settings 39 AV Menu An on-screen slider displays when making some audio and video adjustments. Numeric values represented on the slider range from 0 (minimum) to 63 (maximum), with 31 as the mid-point. AV menu for audio and video adjustments AV Menu Options Video See the description of video adjustments later in this section. Audio See the description of audio adjustments later in this section.
5. TV Menu Settings AV Menu, continued AV > FX Gaming menu for game adjustments AV Menu Options Video Noise High, Medium, Low, Off Reduce minor noise (graininess) in the picture. Use Low with good-quality signals. Use High with poor-quality signals. Use Off to leave the picture unaltered. Saved by input. Video Mute On, Off On displays a blue background when no signal is being received on the current INPUT, COMPONENT, or HDMI jack.
5. TV Menu Settings 41 Video Menu Mitsubishi recommends you assign names to TV inputs before making video adjustments (use the Inputs > Name menu). Otherwise, adjustments will be reset to the defaults if you name inputs afterwards. To make video adjustments: • From the Video menu: 1. Press to highlight an option. 2. Press to display the submenu and adjust. 3. Press MENU to return to the AV menu. • While watching TV: Press the VIDEO key repeatedly to display the video option you want to change.
5. TV Menu Settings Audio Menu To make audio adjustments: • From the Audio menu: 1. Press to highlight an option 2. Press to display the submenu and adjust. 3. Press MENU to return to the AV menu. • While watching TV: Press the AUDIO key repeatedly to display the audio option you want to change. to change settings. Press AV menu, Audio options Audio Menu Options Speakers The Speakers option displays only if an A/V receiver connection has been detected. TV Turn on the internal TV speakers.
5. TV Menu Settings 43 Captions Menu Captions on Analog Channels Captions on Digital Channels The TV can decode captions from ANT 1/ANT 2 and the INPUT 1–3 jacks. Broadcasters can send either standard closed captions or text service. Standard closed captions follow the dialogue of the program and display in a small section of the screen. Text-service closed captions often contain information such as weather or news and cover a large portion of the screen.
5. TV Menu Settings Setup Menu Use the Setup menu to: • Select English or Spanish for menus and on-screen text. • Scan the channels available for the antenna or cable service connected to the ANT 1 or ANT 2 jacks. • Edit channel options, including channel locking. • Set the TV’s internal clock. • Set the TV Timer to turn on the TV automatically at a designated time. • Set the energy mode for power consumption when the TV is powered off. • Set the TV Lamp Mode.
5. TV Menu Settings 45 Setup Menu, continued Edit Virtual Channel Number (digital channels only). A channel number sent by a local broadcaster. Usually the virtual number is associated with the corresponding analog channel number. For example, a broadcaster may associate digital channel 2-1 with their analog channel 2. Physical Digital Channel Number. The channel number officially assigned to the actual broadcast frequency; shown on screen in parentheses.
5. TV Menu Settings Setup Menu, continued Clock Use either the manual or auto method to set the clock. Set the clock if you wish to: • Use the TV’s Timer function. • Maintain accurate ChannelView listings. • Schedule NetCommand- and TV Guide On Screencontrolled recordings. Setup menu, Clock options Setup Menu Options Settings Clock Manual. To set the clock manually: 1. Select Manual. 2 Set the time of day. 3. Set the date. 4. Select your time zone. 5.
5. TV Menu Settings 47 Setup Menu, continued Timer Use the Timer to set a time for the TV to turn on automatically. Use this menu to set a day, time, input, and channel for the Timer. If the TV is already on at the requested time, the TV will automatically tune to the designated channel. • • • The TV clock must be set before you can use the Timer feature. When the Timer turns on the TV, press any key on the remote control to keep it on. Otherwise, the TV will turn off after five minutes.
5. TV Menu Settings Setup Menu, continued Energy The Energy options give you ways to reduce TV power consumption. Setup menu, Energy options Setup Menu Options Energy Mode Energy Fast Power On Low Power Use the Energy Mode option to select the level of power consumption while the TV is turned off. The default setting is Fast Power On. Low Power uses less energy, but TV power-on takes longer and some TV features may be unavailable.
5. TV Menu Settings 49 Inputs Menu Note: When you change an input name in the Name menu and then exit the Name menu: The name is changed The icon in the Input Selection menu is changed Audio and video settings are changed to the defaults for the new device type. All NetCommand “learning” for the input is also erased. Change input names using the Inputs > Name menu.
5. TV Menu Settings Inputs Menu Setting Up TV Guide On Screen Setup of the TV Guide On Screen system is optional. • You must set up NetCommand control of a VCR or A/V disc for recording if you wish to enable recordings through TV Guide On Screen. • Many features of TV Guide On Screen are available without NetCommand control. For example, program listings, program searches, and program reminders function without NetCommand. Display the Inputs > Guide menu to display TV Guide On Screen setup options. 2.
5. TV Menu Settings 51 Lock Menu TV locks available from the Lock menu are: Parent Other Time Front Panel Note: Lock by Ratings Restrict access to programming based on V-Chip rating signals sent by the broadcaster. Lock by Time Restrict TV use by time of day. Lock Front Panel Disable the controls on the front of the TV. Use this option if small children in the home try to press front-panel buttons. Channel Lock is an additional lock that blocks access to specific channels.
5. TV Menu Settings Lock Menu, continued Parent Menu Options (U.S.-based rating system) Option Name and Description Lock Off, On Disables or enables program blocking based on V-Chip signals and the U.S. rating system. TV Rating TV-Y Youth. For children under 7. TV-Y7 Youth 7 and older. TV-G General Audience. For the entire family. TV-PG Parental Guidance. Parental Guidance recommended; may not be suitable for some children. TV-14 Adolescent 14 and older.
5. TV Menu Settings 53 Lock Menu, continued Other Menu Options (alternate rating system) This TV can recognize new rating systems that may come into effect in the future. The Other option remains grayed out until the TV receives a signal using an alternate rating system. Such alternate rating systems will apply to digital programming only.
6 NetCommand About NetCommand • • • • • • NetCommand setup is optional. You can perform NetCommand setup when the TV first recognizes a device during Auto Input Sensing or at any convenient time afterward. NetCommand operates by sending remote control signals from the TV to your other devices via the IR emitters, telling the devices to play, record, change inputs, adjust volume, change channels, or perform other functions.
BWFSBHF TJ[FE EFWJDF 55 6. NetCommand *3 TFOTPS *3 TFOTPS 0O UPQ PG B TJOHMF UBMM EFWJDF The remote control sensor is somewhere IR Emitter Placement (NetCommand) between these two positions. This is usually An IR emitter cable is included with the TV. enough accuracy for placement of the IR emitters.
6. NetCommand Initial NetCommand Setup for Most Devices To perform this procedure, you need: • The remote controls for both the TV and the device you want to control. • The IR emitter cable supplied with the TV. Note: To set up an A/V receiver, see “Set Up NetCommand Control of an A/V Receiver” later in this chapter. 1. Connect and position the IR emitters for the devices you wish to control. See “IR Emitter Placement” in this chapter. 2. Set the TV’s remote control slide switch to the TV position.
6. NetCommand NetCommand Specialized Device Keys Refer to this chart when “learning” device keys. “Learn” some, all, or none of the keys used for each device type. The chart has space for you to write in functions you assign to the F1–F4 keys. See the following page for more on keys marked in the “Special Operation Method” column.
6. NetCommand Operating NetCommand-Controlled Devices To Control Most Device Types As an example of NetCommand control, if you are watching your cable box and you wish to tune to the next channel higher, press CH/PAGE . NetCommand then sends the “learned” channel-up control signal to the cable box. 1. With an IR emitter properly positioned in front of the device, use the Inputs > Learn screen to perform NetCommand setup for the device. 2.
6. NetCommand 59 Operating NetCommand-Controlled Devices, continued Key Name in Learning Screen Special Operation Description and Setup How to Use Guide Displaying the Disc Menu (DVD or high-definition disc format) While watching the device, press GUIDE to display the disc menu. “Learn” the Disc Menu, Top Menu, or other key as named on the original remote in the Guide learning position.
6. NetCommand Setting Up NetCommand Control of an A/V Receiver Perform this setup to: • Operate the A/V receiver’s power and volume functions with the TV’s remote control. • Enable the A/V receiver to switch automatically to the correct audio input when you select a device in the TV’s Input Selection menu. To set up control of an A/V receiver you need: • The remote controls for both the TV and the A/V receiver. • The IR emitter cable supplied with the TV.
6. NetCommand Setting Up NetCommand Control of an A/V Receiver, continued could have HDMI output. A DVD player is used in this example. Your setup may include additional devices with digital surround sound connected directly to the A/V receiver. These devices might be a DVD player plus a cable box or satellite receiver. Setup to Control Automatic Switching of A/V Receiver Audio Inputs • • Digital Surround Sound: Use Setup 2.
6. NetCommand Setting Up NetCommand Control of an A/V Receiver, continued • To erase the IR code just “learned,” press CANCEL while the name is highlighted. WJEFP 5. Press to highlight the name Input1. You can enter a custom name using the letters/numbers on the remote control. It is best to assign names to “learned” inputs that match the input names displayed on the A/V receiver.
6. NetCommand 63 NetCommand-Controlled Recording This section describes making recordings independently of the TV Guide On Screen system. For instructions on setting up recordings using TV Guide On Screen, see the separate TV Guide On Screen® Interactive Program Guide User’s Manual. Before You Begin For best results, review this list of factors that may affect your recordings. Recordable Inputs You can record from the ANT 1 or ANT 2 jacks, the INPUT 1–3 jacks, or the IEEE 1394 inputs.
6. NetCommand NetCommand-Controlled Recording, continued b. Highlight List to display the Record List. 7. Cancelling Recordings Press MENU to return to the top row of icons or press EXIT to return to TV viewing. Use the Record menu’s Cancel option to cancel a recording in progress. Record List To Cancel a Recording in Progress Press MENU and then press menu Cancel icon. 2. Press CANCEL. 1.
6. NetCommand 65 NetCommand-Controlled Recording, continued Recording from ChannelView™ ChannelView™ is available when TV Guide On Screen is disabled. ChannelView provides program listings, as sent by the broadcasters, for memorized channels on ANT 1 and ANT 2. Press the GUIDE key while watching ANT 1 or ANT 2 to see ChannelView listings and to set up immediate or future recordings as described here. b. Highlight List to display the Record List. 8.
6. NetCommand Using IEEE 1394 Devices IEEE 1394 Devices in the Input Selection Menu Some non-audio/video or incompatible IEEE 1394 devices, such as personal computers (PCs), may not be detected by the TV and do not appear in the Input Selection menu. Such devices can, however, coexist with and work with compatible devices on the IEEE 1394 network. An IEEE 1394 device may be a combination of two or more types of devices, called sub-units, such as a recording device that is also a tuning device.
6. NetCommand 67 Using IEEE 1394 Devices, continued Recording to IEEE 1394 Devices Copying A/V Disc Recordings You can use the TV’s NetCommand recording functions to control recording to IEEE 1394 devices. The following table shows which signals can be recorded to an IEEE 1394 digital VCR or A/V disc. Tracks you record to disc may have copy restrictions assigned to them. To learn a track’s copy restrictions, highlight the track in the Track List and press INFO.
Appendices Appendix A: Specifications Size, Weight, and Power Consumption Dimensions (inches) Outputs Height Width Depth Weight (lbs.) WD-57833 35 51.3 13.9 62.4 275 WD-65833 39.5 58.2 15.4 78.0 275 WD-73833 43.6 65.2 17.5 92.6 275 Model Power Inputs Type Qty.
Appendices 69 Appendix B: Lamp-Cartridge Replacement and Cleaning WARNING THE ACCESS PANEL IS PROVIDED WITH AN INTERLOCK TO REDUCE THE RISK OF EXCESSIVE ULTRAVIOLET RADIATION. DO NOT DEFEAT ITS PURPOSE OR ATTEMPT TO SERVICE WITHOUT REMOVING PANEL COMPLETELY. CAUTION BURN DANGER! HOT SURFACES INSIDE! Touch lamp cartridge handle only. Do not touch lamp or lamp cartridge housing. Keep lamp cartridge horizontal during removal. Do not tilt as glass may come out and cause injury.
Appendices Appendix B: Lamp-Cartridge Replacement and Cleaning, continued Lamp-Cartridge Replacement Removing the Old Lamp Cartridge 1. 2. 3. 4. 5. Turn off TV power and allow the lamp to cool for at least one hour before proceeding. After the lamp has cooled, remove the cover of the lamp compartment, located on the back of the TV. Refer to figures 1 and 2. Use a #2 (large) Phillips screwdriver to loosen the screw securing the cover.
Appendices Appendix C: Bypassing the Parental Lock 71 Bypassing the Parental Lock Lock Bypass Instructions Have Been Filed for Future Reference After you set the lock, you must use your pass code to view a locked program, view the locked TV, view a locked channel, cancel the lock, or enter the Lock menus. IMPORTANT Cut along the dotted line and file bypass instructions in a safe place for future reference. If you forget your pass code, you can view the locked TV without entering your pass code.
Appendices This page intentionally left blank
Appendices Appendix D: Programming the Remote Control This appendix explains programming the TV’s remote control to operate other A/V devices. This is distinct from NetCommand control. The TV’s remote control can operate other devices by three different methods: VCRs and DVRs CH / POWER SLEEP (FAST Forward) (Pause) (Play) • Remote Control Programming: You must move the slide switch to the position specific to the type of device.
Appendices Appendix D: Programming the Remote Control, continued Programming the Remote Control 1. Move the slide switch at the top of the remote to the position for the product you want to control. Refer to the table below. Only one of each device type can be controlled in each slide-switch position. 6. Once you have found the correct code, write it in the space below for future reference.
Appendices 75 Appendix D: Programming the Remote Control, continued Programming Codes Audio Amplifiers Code Brand Acurus Adcom Altec Lansing Aragon Bel Canto Design Bose Carver Classe Curtis Mathes Durabrand Elan GE Harman/Kardon JVC Klipsch Left Coast Lenoxx Lexicon Logitech Marantz Mark Levinson McIntosh Mondial Optimus Philips Pioneer Polk Audio RCA Realistic Sharp Sony Soundesign Technics Toshiba Victor Wards Yamaha 30765 31100, 30577 31742 30765 31583 30674 30892 31462, 31461 30300 31561 30647 3007
Appendices Appendix D: Programming the Remote Control, continued Programming Codes, continued CD Players Brand Aiwa Akai Arcam Audio-Technica Burmester California Audio Labs Carver Classic Denon DKK DMX Electronics Emerson Fisher Garrard Gemini Genexxa GPX Harman/Kardon Hitachi Integra JVC Kenwood KLH Koss Krell LG Linn LXI Magnavox Marantz Mark Levinson McIntosh MCS MGA Miro Mission Mitsubishi MTC NAD Nikko NSM Onkyo Code 30157 30156 30157 30170 30420 30303, 30029 30437, 30299, 30179, 30157 31297
Appendices Appendix D: Programming the Remote Control, continued Programming Codes, continued Cable Boxes Brand Optimus Pace Panasonic Panther Paragon Philips Pioneer Popular Mechanics Pulsar Quasar RadioShack RCA Realistic Recoton Regal Regency Rembrandt Runco Samsung Scientific Atlanta Seam Sejin Signal Signature SL Marx Sony Sprucer Starcom Stargate Starquest StarSight Supercable Supermax Sylvania Tandy TeleCaption Teleview Texscan TFC Thomson Timeless Tocom Torx Toshiba Tristar Tusa TV86 Unika Uni
Appendices Appendix D: Programming the Remote Control, continued Programming Codes, continued DVD Players/Recorders Brand Code DVD Players/Recorders Brand Code Onkyo Tredex NEC Nesa Next Base NexxTech Norcent OptoMedia Electronics Oritron Panasonic 20785 20717 20826 21402 21265, 21107, 21003, 20872 20792, 20627, 20503 20896 20651 21762, 20703, 20632, 20503, 20490 Philips 21354, 21267, 20675, 20646, 20539, 20503, PianoDisc 21024 Pioneer 21571, 20632, 20631, 20571, 20525 Polaroid 21086, 21061, 21
Appendices Appendix D: Programming the Remote Control, continued Programming Codes, continued Satellite Receivers Brand Code Toshiba UltimateTV Uniden US Digital USDTV Voom Zenith 11749, 11285, 10819, 10790, 10749 11640, 11392 10724, 10722 11535 11535 10869 11856 VCRs and DVRs Brand Code ABS Admiral Adventura Aiko Aiwa Akai Alienware America Action American High Asha Audiovox Beaumark Bell & Howell Broksonic Calix Canon Capehart Carver CCE Citizen Colt Craig Curtis Mathes Cybernex CyberPower Daewo
Appendices Appendix D: Programming the Remote Control, continued Programming Codes, continued VCRs and DVRs Brand Code Polk Audio Portland Profitronic Proscan Protec Pulsar Quarter Quartz Quasar RadioShack Radix Randex RCA Realistic ReplayTV Ricavision Ricoh Runco Salora Samsung Samtron Sanky Sansui Sanyo Scott Sears Sharp Shintom Shogun Singer Sonic Blue Sony Stack 9 STS 20081 20020 20240 20761, 20760, 20202, 20060 20072 20039 20046 20046 21162, 20162, 20077, 20035 21037, 20000 20037 20037 20880
Appendices 81 Appendix E: Troubleshooting TV Reset Comparison Guide You can resolve many common TV problems using the reset functions described in the following table. See also the troubleshooting suggestions later in this appendix. IMPORTANT Before you change sound or picture settings: If picture or sound settings seem wrong for a broadcast channel (a channel from ANT 1, ANT 2, a cable box, or satellite receiver), first check other channels from the same input before changing settings.
Appendices Appendix E: Troubleshooting, continued Reset Name When to Use Front-Panel Lock To re-enable the frontRelease panel controls after activation of the FrontPanel Lock How to Use Resulting Action • When Energy Mode is set to Fast Power On, press and hold the MENU button on the front panel for over eight seconds. • When Energy Mode is set to Low Power, press POWER on the front panel to turn on the TV. Press and hold the MENU button on the front panel for over eight seconds.
Appendices 83 Appendix E: Troubleshooting, continued General TV Operation Symptom Remarks 1. A fan is running even while the TV is powered The room is too warm. When the TV is off, internal components off. continue to draw power and must be cooled by the fan. 2. The TV remote control does not work. • • • • • Check that the batteries are fresh and installed correctly. Check that the slide switch on the remote is set to TV. Be no more than 20 feet from the TV when using the remote control.
Appendices Appendix E: Troubleshooting, continued TV Channels Symptom Remarks 3. Name options are not available for some channels. You can name only memorized analog channels and memorized digital channels not named by the broadcaster. 4. When ChannelView list is displayed, information appears incomplete • • Available information is sent from the broadcaster or cable provider. No other data is available. Make sure the TV clock is set correctly. TV Power On/Off 1.
Appendices 85 Appendix E: Troubleshooting, continued Picture Symptom Remarks 4. You cannot view a picture when playing a VHS tape. Check your VCR’s owner’s guide for further troubleshooting. 5. VCR or DVD player’s on-screen menus jitter up and down. Possible cause: Many VCRs and DVD players provide onscreen menus at only half-resolution. These lower-resolution graphics may appear to jitter up and down when the TV converts them to high-definition graphics. 6.
Appendices Appendix E: Troubleshooting, continued Indicators 4. Symptom Remarks STATUS indicator light is a steady/flashing red. • • • Unplug set from AC power. Plug back in and wait one minute for blinking to stop. Press SYSTEM RESET button and wait for blinking to stop. If blinking continues, service is required. Contact your dealer or a Mitsubishi Authorized Service Center to arrange for a service evaluation.
Appendices 87 IEEE 1394 Recording 1. Symptom Remarks Program to be recorded was correctly selected from ChannelView, but incorrect program was recorded. • • • The broadcaster supplied program information that was incorrect and/or was changed after a recording was added to the Record List. TV Clock not set. Daylight Savings Time option is incorrect. 2. Incomplete ChannelView program recorded. Recording device may lack sufficient blank space to make a full recording. 3.
Appendices IEEE 1394 Devices 5. Symptom Remarks There is no audio and video from the IEEE 1394 device. • • • • • • • • • The device is not turned on. Turn the device power on. No tape is inserted in the DVCR. The media is blank (has no recording). The play command failed. Try pressing PLAY again on the device’s remote control or front panel. The device is already in use (for example, the device is currently recording). The source is copy-protected or violates copy protection.
Trademark and License Information 89 Trademark and License Information LICENSOR’S SUPPLIERS DO NOT MAKE OR PASS ON TO END USER OR ANY OTHER THIRD PARTY, ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY OR REPRESENTATION ON BEHALF OF SUCH SUPPLIERS, INCLUDING, BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, TITLE, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Digital Light Processing® and DLP® are registered trademarks of Texas Instruments.
Trademark and License Information Mitsubishi TV Software END-USER LICENSE AGREEMENT FOR EMBEDDED SOFTWARE IMPORTANT – READ CAREFULLY: This License Agreement is a legal agreement between you (either an individual or an entity) and Mitsubishi Digital Electronics America, Inc. (MDEA) for all software pre installed and/or provided along with this television (“Software”). By utilizing this television and Software, you agree to be bound by the terms of this License Agreement.
Mitsubishi DLP Projection Television Limited Warranty MITSUBISHI DIGITAL ELECTRONICS AMERICA, INC. (“MDEA”) warrants as follows to the original purchaser of this television from an authorized MITSUBISHI Audio/Video Dealer, should it prove defective by reason of against defects arising from improper workmanship and/or material: a. Parts. The lenticular (i.e.
c. Proof of purchase date from an authorized MITSUBISHI dealer is required when requesting warranty service. Present your sales receipt or other document which establishes proof and date of purchase. THE RETURN OF THE OWNER REGISTRATION CARD IS NOT A CONDITION OF COVERAGE UNDER THIS LIMITED WARRANTY. However, please return the Owner Registration Card so that we can contact you should a question of safety arise which could affect you. d.
Index Index A A/V Discs 67 A/V Memory Reset 81 A/V Receiver Adding NetCommand Control 60, 61, 62 and the TV Speakers 42 and TV’s Remote Control 60, 73 Audio Lock 74 Codes 75 Connecting 9, 10, 23, 61 Controlling Sound Volume 14 A/V Reset 7, 81 Adjust Keys (Up/Down/Left/Right) 28, 38 Air Filter 70 Anamorphic Picture Format 33, 63 Playback 63 Antenna Connecting 19 Antenna Inputs (ANT 1/MAIN, ANT 2/ AUX) 9 Audio Lock 74 Audio Menu 42 Auto-off. See Sleep Timer (auto-off) Auto-on.
Index Low Power (Energy Mode) 48 M Media Setup Menu 37 Memorizing Channels 13 Add Single Channel to Memory 44, 45 Mute MUTE key 28 Video Mute 40 N NetCommand A/V Receiver Control 60 Compared to Programming the Remote Control 73 Description 54 Initial Setup for Most Devices 56 NetCommand for HDMI Devices 7, 29, 73 Operating 58, 59 Specialized Device Keys 57 Troubleshooting 86 Noise, Video 40 P Parent Menu 52 Pass Code Resetting 71 Setting 51 PAUSE Key 29 PerfectColor 39 Perfe
Website: www.mitsubishi-tv.com E-mail: MDEAservice@mdea.com For questions, call Consumer Relations at 800-332-2119 To order replacement or additional remote controls, lamp cartridges, or Owner’s Guides Visit our website www.mitsuparts.com or call 800-553-7278 SYSTEM RESET If the TV does not respond to the remote control, front panel controls, or will not power on/off, press the SYSTEM RESET button on the front panel. The green LED will flash quickly for about one minute.
