Owner’s Guide Projection Television Models WT-, WS-, WS- and WS- visit our website at
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER OR BACK. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user of the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be sufficient magnitude to constitute a risk of electric shock.
Contents Chapter 1 Television Overview Chapter 2 Connections Chapter 3 Remote Control Functions Chapter 4 Menu Screen Operations Chapter 5 Format Sizes, PIP/POP Operations, Appendices, Troubleshooting Important Notes ................................................................................................................................. 6 Thank you ..........................................................................................................................................
IMPORTANT SAFEGUARDS Please read the following safeguards for your TV and retain for future reference. Always follow all warnings and instructions marked on the television. 1. Read, Retain and Follow All Instructions Read all safety and operating instructions before operating the TV. Retain the safety and operating instructions for future reference. Follow all operating and use instructions. 2. Heed Warnings Adhere to all warnings on the appliance and in the operating instructions. 3.
IMPORTANT SAFEGUARDS, continued 12. Power Lines An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. 13.
IMPORTANT NOTES Warning: Do not leave stationary PIP/POP, or letterbox images on the screen for extended periods of time. Mix the types of pictures shown. Uneven picture tube aging is NOT covered by your warranty. The normal use of a TV should include a mixture of TV picture types. The most frequently used picture types should fill the screen with constantly moving images rather than stationary images or patterns.
Chapter . . . Television Overview Thank you .................................................................................................................. 8 Unpacking your New TV............................................................................................ 9 Special Features........................................................................................................... 9 NetCommand® IR for WS-48413, WS-55413, WS-65413 ............................... 10 Front Control Panel ....
Thank You for Your Purchase Welcome to the wonderful and exciting world of digital television! We are honored that you chose Mitsubishi as your premier home entertainment partner. The development team at Mitsubishi Digital Electronics America (MDEA) understands that our customers demand and expect the very best. MDEA was founded on the core beliefs and philosophies that drive us to deliver products that implement the latest in advanced television technology.
Unpacking Your New TV Please take a moment to review the following list of items to ensure that you have received everything including: Special Features Your new High Definition (HD) upgradeable bigscreen television has many special features that make it the perfect addition to your home entertainment system. A few of these special features are: PLAY STOP FF/FWD Using Picture-in-Picture and Picture-outsidePicture gives you exciting options for viewing favorite programs.
NetCommand® IR for models WS-, WS-, WS- Your new Mitsubishi television is equipped with NetCommand IR, the latest breakthrough in home theater control. NetCommand technology makes your television the brain of your home theater. By connecting compatible A/V devices and then using the menu to have the television “learn” which devices are connected, you will be able to view and control these devices.
Front Control Panel Many remote control buttons are duplicated on the front control panel. Duplicate buttons are shaded in the panels shown below. Please see Remote Control Functions, page , for an explanation of their usage.
Back Panel Input/Output for WS-, WS- & WS- Side Panel Input/Output for WT- 6 TM MONITORLINK /DVI WS-48413, WS-55413, WS-65413 Back Panel 2 3 5 4 COMPON E NT DTV( Y PbPr/ GBRH V ) 4 80 i / 4 80P/ 1080i MONITOR OUT INPUT 2 1 480 i / 480P /1080 i 2 1 TM MONITORLINK RS-232C CONTROL 7 Y G Y S-VIDEO Pb B Pb Pr V I D EO AUDIO - AUDIOLEFT/ (MONO) AUDIORIGHT AUDIO R IG HT R I GH T CAUTION: AN T - A V AUDIO L E FT / ( MONO) (MONO) 1 R Pr AUDIOLE F T / H SERVIC
Chapter . . . Connections 2 Connecting an Antenna or Wall Outlet Cable .............................................................. 14 Connecting an Antenna to a Cable Box or VCR............................................................ 15 Connecting an Antenna to a Cable Box and VCR ......................................................... 16 Connecting Audio Components to a Cable Box or VCR ............................................... 16 Connecting an Audio Receiver .............................
Connecting an Antenna or Wall Outlet Cable Note: The TV back panel and connections shown here are for reference only and may vary by model. Separate UHF and VHF Antennas ������������� ���������������� ������������ ��������������� (Figure 1) �������������� ��������������� �������� ������� �������� 1. Connect the UHF and VHF antenna leads to the UHF/VHF combiner. 2. Push the combiner onto ANT-A on the TV back panel.
Connecting an Antenna to a Cable Box or VCR Note: The TV back panel and connections shown here are for reference only and may vary by model. ������������������������������� ��� � �� � �� � � � �������� ����� �� �� � Cable Box (Figure 3) 1. � Connect two coaxial cables as follows: 2. One from LOOP-OUT on the TV back panel to IN on the cable box back panel. � � 3. ��������� ������������������������������� ��� �� Connect the incoming cable to ANT-A on the TV back panel. Figure 3.
Connecting an Antenna to a Cable Box and VCR, Connecting Audio/Video to the Cable Box or VCR Note: The TV back panel and connections shown here are for reference only and may vary by model. TV back panel (section detail) LOO P OU T AN T - A Incoming Cable Cable Box AN T- B (Figure 5) 1 1. 4 2 Connect three coaxial cables as follows: Cable Box Rear Terminals 2 3 2. One from LOOP-OUT on the TV back panel to IN on the back of the cable box. 3.
Connecting an Audio Receiver Note: The TV back panel and connections shown here are for reference only and may vary by model. Stereo Audio System (recommended for shelf units or A/V receivers without digital audio inputs) (Figure 7) 1. Connect the audio cables from AUDIO MONITOR OUTPUT on the TV back panel to TV IN or AUX IN terminals on the back of the audio system. • The red cable connects to the R (right) channel • The white cable connects to the L (left) channel 2.
Connecting a DVD Player or Other S-Video Device Note: The TV back panel and connections shown here are for reference only and may vary by model. DVD Player with Component Video ������� ���� ��� � � ����������� � � � � � � �� � �� (Figure 9) ����� ����� � � � �� � � ����� ����� � � �� �� � 1. Connect the Component Video cables from (YCb Cr or Y Pb Pr) VIDEO OUT on the back of the DVD player to COMPONENT (1 or 2) on the TV back panel. The correct connections are: A. Y to Y B.
Connecting a DTV Receiver Note: The TV back panel and connections shown here are for reference only and may vary by model. DTV Connectors and Adaptors (Figure 11) The TV back panel has five RCA-type connectors for the DTV connection. The back panel of your DTV receiver may use RCA-type connectors or BNC-type connectors. If your DTV receiver comes with BNC type connections, you will need to purchase BNC to RCA adaptors to connect the TV to the DTV receiver.
Connecting a DTV Receiver, continued Note: The TV back panel and connections shown here are for reference only and may vary by model.
Connecting MonitorLink™, NetCommand® IR Emitter Note: The TV back panel and connections shown here are for reference only and may vary by model. MonitorLink/DVI (Figure 14) TM MONITORLINK /DVI DTV( Y PbPr/ GBRH V ) Y G 2. 3. 4. Connect one of the IR emitters to one IR EMITTER jacks on the TV back panel. Place the IR emitter cable under or on top of each A/V device.
How Connections Affect the PIP (Picture-in-Picture) and POP (Picture-Outside-Picture) To see a picture in the PIP or POP, you may need to select an input source. If the only input connected is ANT-A, then both the main picture and the PIP/POP will be from that input source. If other video equipment is connected, you may be able to view these input sources as the PIP/POP.
Chapter . . . Remote Control Functions 3 Overview of the TV Layer Buttons ............................................................................... 24 Care and Operation....................................................................................................... 25 Channel Selection ......................................................................................................... 26 Sleep Timer ........................................................................................
Remote Control Functions: Overview of the TV Layer Buttons Overview (Figure 1, following page,) Slide Switch: Select A/V product to be controlled by the remote control. POWER: Turns power on and off for TV and other connected A/V products. Numbers: Individually select channels or input information into TV. SQV (Super Quick View™): Scan through a memorized list of favorite channels. QV (Quick View™): Switch to last channel viewed.
Remote Control Functions: Care and Operation Operation Installing the Batteries: (Figure 2) 1. Remove the remote control’s back cover by gently pressing the ridged tab in the direction of the arrow and sliding off the cover. 2. Load the batteries, making sure the polarities (+) and (-) are correct. For ease of installation, install the negative (-) side first. CABLE/DBS/DTV VCR DVD AUDIO TV 1 2 3 4 5 6 7 8 9 SQV 0 QV CH VOL POWER DEVICE Be within 20 feet of the equipment.
Remote Control Functions: Channel Selection, Sleep Timer Channel Selection Enter three numbers ( ex. for channel 2, press 002). or or Press the channel number and ENT (ex. for channel 2, press 2, then ENT). Enter the channel number and wait four seconds (without pressing ENT). The TV will change automatically. Note: Use the CANCEL button for digital subchannel (-) selection in the CABLE/DBS/DTV layer.
Use of the Remote Control with Other A/V Products For WS-48413, WS-55413 and WS-65413, the following information is not applicable if you are using NetCommand® IR. Programming the Remote Control to Use with Other Brands of Audio and Video Products: CABLE/DBS/DTV VCR DVD AUDIO TV Move the slide switch at the top of the remote to the product you want to control. 2. Press and hold the POWER button on the remote control. 3.
Use of the Remote Control with Other A/V Products For WS-48413, WS-55413 and WS-65413 the following information is not applicable if you are using NetCommand® IR CABLE/DBS/DTV VCR DVD AUDIO TV 1. 3. DVD/LDP brand Mitsubishi JVC Panasonic Philips Pioneer DVD Samsung Sony Toshiba 2. POWER DVD Player Codes Code to enter: 003 257 250 258, 253, 272 252 261 254 253 If your DVD code is not listed here, please see page 68 for a complete listing. To reset to default code, enter 000 Figure 4.
Remote Control Functions: Special Functions When your remote control has been Programmed to operate another manufacturer’s product, the function performed on each layer may vary.
IMPORTANT NOTES Warning: Do not leave stationary PIP/POP, or letterbox images on the screen for extended periods of time. Mix the types of pictures shown. Uneven picture tube aging is NOT covered by your warranty. The normal use of a TV should include a mixture of TV picture types. The most frequently used picture types should fill the screen with constantly moving images rather than stationary images or patterns.
Chapter . . . 4 Menu Screen Operations The ViewPoint® Menu System ....................................................................................... 32 MAIN Menu ............................................................................................................... 33 SETUP Menu ............................................................................................................... 35 CAPTIONS Menu........................................................................................
The Menu System Your TV has Mitsubishi’s exclusive on-screen operating system, which provides on-screen information for menu choices and changes. A picture (icon) will be highlighted and can be selected using the remote control’s ADJUST arrows. When selected, the appropiate menu will appear or start an automatic function. You may then make changes within the menu or access available sub-menus. A highlighted square button indicates that you may make changes to the menu screen.
Main Menu Screens: Overview SETUP Menu MAIN MENU (Figure 3) ����� ���� �������� �������� ���������� � � ����� ��� �� ����� ����� �������� �������� � ������� ������ ����� � �������� ENTER�� for ������ menu or to start ����� ��� ���� ������ to return �� MENU ������ ������ ���� �� ������ Figure 3.
Main Menu Screens: Overview, continued V-CHIP LOCK Menu (Figure 6) Lock the TV by selecting times or choosing programs to block based on rating signals sent by your local broadcasting system. ���� ���� ������ ���� ���� ���� �� ���� � �� ���� ���� � ����� �� NOTE: For WS-, WS- or WS- set the Front Button Lock at this screen. ������ ���� � ����� �� ����� ������ ���� � ��� See pages - for more detailed setup information. ������ See page for V-Chip rating information.
SETUP Menu: Memorize Channels, Memorize Menu, Input Assignment (WT-) Memorize Channels ��������� (Figure 9) ���������� ������������������ � � � � � � � ��� ������� ����� Select Memorize Channels for each antenna you use. The TV will find and remember strong channels and skip the unused or weaker channels.
SETUP Menu: NetCommand® IR Setup, Language, IR Device Setup Menus (WS-, WS-, WS-) NetCommand IR Setup Menu (Figure 12) For simple control with the Mitsubishi TV remote, select the NetCommand IR SETUP from the SETUP menu screen. There are basic steps to the NetCommand IR Setup: 1. Select the devices that are connected to the TV (Net Command IR Device Setup Menu) 2. Have the TV learn the device’s remote control keys (NetCommand IR [Device] Learn menu) 3.
SETUP Menu: NetCommand® IR [Device]Learn Menus (WS-, WS-, WS-) NOTE: You will need both the television remote and the device’s remote to perform the Learn Menu functions. 2.
SETUP Menu: NetCommand® IR Input Assignment and Device Selection Menus (WS-, WS-, WS-) NOTE: You will need both the television remote and the device’s remote to perform the Learn Menu functions. 3. NetCommand IR Input Assignment Menu (Figure 19) After learning all the individual control buttons for each device, you can change the input that each device is connected to.
SETUP Menu: Manually Setting the Clock ��������� ���������� Clock Setting (Manual) (Figure 21) ���������� �������������� � � � ��������� ����������� � � � ����������� �������� � � � � �������� ����������� � � � ��������� � � ��������� ������������������ ���� The Clock Setting menu default allows the clock time to be set manually. To set the clock automatically, please see page . To set the clock manually, first select the current time, including AM or PM.
SETUP Menu: Automatically Setting the Clock Clock Setting (Auto) (Figure 23) Set the Clock Setting to Auto to automatically set the day and time using Extended Data Service (XDS) time data. This data is automatically retrieved when tuned to a PBS channel or other channel in your area that provides this service.
SETUP Menu: Language, Front Button Lock (WT-) Language ��������� (Figure 26) ���������� ������������������ � � � � � � � ��� ������ ���� � � ���������� ������������������� � � ����� ���������������� ����� ��������� � �������� � Display the on-screen menus in either English or Spanish (Español). The first time you powered On your TV, you were requested to select an on-screen menu language.
SETUP Menu: Energy Mode (WS-, WS-, WS-) Energy Mode (Figure 28) This feature is only for models WS-, WS- and WS-. Change the setting to Low (less than watt) when you want the TV to operate in an energy saving mode when it is turned off. If the Energy Mode is set to Low, it will not be possible to record while the TV’s power is off. There will be no signal from LOOP OUT (on the TV back panel) to the VCR and/or cable box.
CAPTIONS Menu: Overview CAPTIONS Menu ��������� (Figure 29) ������������� ��������������� ������������� ������������ ������ ������������������������������ Turn On or Off the closed caption decoder, select the type of captions or text, and choose black or translucent gray as the background color for the closed caption area. Broadcasters can send either Standard or Text closed captioning. ENTER for menu or to start ����������������� MENU to return ��� ������� ������ ����� ��� ������ Figure 29.
CAPTIONS Menu: Closed Captions, Background Color Closed Captions MAIN MENU (Figure 29) CAPTIONS menu Display one of the following types of Closed Captions: Closed Captions : On if mute CC Background : Gray CC1, CC2, CC3, or CC4: Standard closed captioning signals. Text1, Text2, Text3, or Text4: Text closed captioning signals. On if mute: Closed captions when mute. When selected, the standard closed captioning signal (CC1) will turn on/off by pressing the MUTE button on the TV remote control.
CHANNEL EDIT Menu: Antenna, Channel Selection Antenna ��������� (Figure 32) ����������������� �������� � � � � �������� �������� � � � � ����� ������� � � � � ������� ������ � � � � ������ ���� � � � � � � � � � � � ������ ����� Select Ant-A or Ant-B. For each antenna, you can add or delete channels in memory, name channels, and add channels to the SQV (Super Quick View™) list.
CHANNEL EDIT Menu: Memory, Name Selection Memory (Figure 34) Add weaker channels viewed with Ant-A or Ant-B and delete unwanted channels, after all available channels have been memorized with Memorize Channels (page ). Use the CH (channel) button on the remote control to view memorized channels.
CHANNEL EDIT Menu: Using SQV (Super Quick View™) Using The Menu Screen ��������� (Figure 36) ����������������� �������� � � � � �������� �������� � � � � ����� ������� � � � � ������� ������ � � � � ������ ���� � � � � � � � � � � � ������ ����� ENTER for menu or to start ���������������� ����������������� MENU to return ��� ������� ������ ���������������� Figure 36.
V-CHIP LOCK Menu: Overview V-Chip Signal Information When provided by the broadcaster, V-Chip ratings can be used to control which programs can be viewed or will be blocked. When V-Chip ratings are sent, you will see the ratings when you change the channel or when you press the INFO button on the remote control. Both TV and Movie ratings will display. TV ratings apply to programs and movies developed for TV and may have supplemental blocking by content categories.
V-CHIP Menu: Setting Up and Using V-Chip Lock Passcode ��������� ���������������� Setting Up the V-CHIP LOCK Passcode (Figure 38) ��������������� � � � ������������������� � ���������������������� � � ������� ��������������������������� � ���������������� � � Figure 38.
V-CHIP Menu (WT-): Allowing or Blocking Ratings, Locking by Hour or Time Allowing or Blocking by Ratings (Figure 40) Block or Allow programs based upon rating signals sent by the broadcasting station. The factory preset for TV Ratings is TV-PG (Parental Guidance) allowing only programs rated TV-PG or lower. The factory preset for Movies is PG, allowing only movies rated PG or lower. Please refer to page for a detailed ratings description.
V-CHIP Menu (WS-, WS-, WS-): Locking by Time, Front Button Lock, Selecting V-Chip Rating Menu MAIN MENU LOCK by Time (Figure 42) Select On at Lock by Time, then select the Lock Time and Unlock Time. This will lock the entire TV. Your TV continues to be locked until you input your passcode, or when the locked time expires. ENTER for menu or to start MENU to return Figure 42.
V-CHIP Menu (WS-, WS-, WS-): Allowing or Blocking Ratings, Lock by Time Allowing or Blocking by Ratings (Figure 45) Block or Allow programs based upon rating signals sent by the broadcasting station. The factory preset for TV Ratings is TV-PG (Parental Guidance) allowing only programs rated TV-PG or lower. The factory preset for Movies is PG, allowing only movies rated PG or lower. Please refer to page for a detailed ratings description.
ADVANCED FEATURES Menu: Color Balance, Auto Color Correction, PerfectColor ™, Reset Color Color Balance Menu ��������� (Figure 47) Your Mitsubishi TV uses six colors (Magenta, Red, Yellow, Green, Cyan and Blue) to create Color Balance. You may adjust these colors automatically or manually or reset them to the default settings.
ADVANCED FEATURES Menu: TIMER, Timer Menu, and Set Time TIMER (Figure 50) The timer will automatically turn the TV on (if it is off) at the time you schedule and select. When Ant-A or Ant-B is the selected input, you may select any memorized channel. The TV will tune to this channel when the timer turns it on. The TV’s clock must be set before you can set the timer. If you have not set the clock and/or day, you will see the CLOCK menu instead of the Timer menu.
ADVANCED FEATURES Menu: Set Day, Input, and Channel ��������� ���������������������� ������ Set Day (Figure 53) ���������� � � � � ����� ��������� � � � � ���������� �������� � � � � ���������� ������ � � � � ������� �������� � � � � ����� Select the days that the TV will turn on automatically. You can select Everyday, Mon-Fri (Monday through Friday), or the individual days of the week.
ADVANCED FEATURES Menu: CONVERGENCE CONVERGENCE Menu (Figure 56) Your Mitsubishi TV has three picture tubes which are aligned to properly converge the projected light beams on the screen. Each picture tube projects a single color of red, blue or green. During production, your TV was carefully adjusted to properly align these colors. As a special feature, you have the ability to adjust the red and blue light beams in reference to the fixed green light beam. This process is called convergence.
ADVANCED FEATURES Menu: Reset Convergence, Video Mute, Black Enhancement RESET FACTORY DEFAULTS ��������� ���������������������� (Figure 59) ���������������� If you do not want to reset the convergence, press the MENU key to return to the Convergence menu without performing a reset.
AUDIO/VIDEO SETTINGS Menu: Overview AUDIO/VIDEO SETTINGS Menu (Figure 62) Each input has its own A/V memory. You can adjust each input’s A/V memory in two ways, using either the menu or the remote control. A/V Memory Reset A/V Memory Reset will return the currently selected input’s A/V memory to the factory settings. To reset an input’s A/V memory, select A/V Memory Reset, select the input you want to reset, and press ENTER. TV Speakers This selection will turn on or off the TV’s internal speakers.
AUDIO/VIDEO Setting Descriptions: Audio Audio Settings Bass Enhances or reduces low frequency sound. Treble Enhances or reduces high frequency sound. Balance Adjusts the level of sound between the left and right speakers. Surround Creates simulated stereo and surround effects. Your choices are: • Off: No surround effects. Use this setting when using an A/V receiver with Dolby™ Pro Logic Surround, or Dolby™ Digital Surround.
AUDIO/VIDEO Setting Descriptions: Video Video Settings Contrast Provides a slider to adjust the white-to-black level. Low contrast shows a variety of shades in darker images, while high contrast shows darker images more uniformly black and makes colors appear more vibrant. Brightness Provides a slider to adjust the overall brightness of the picture. Sharpness Provides a slider to adjust the detail and clarity. Color Provides a slider to adjust the color intensity.
Chapter . . . 5 Format Sizes, PIP/POP Operations, Appendices, Troubleshooting Available On-Screen Format Sizes ..........................................................................62 Operation of PIP and POP......................................................................................64 Appendix A: Bypassing the V-Chip Lock ................................................................65 Appendix B: HD Input Connection Compatibility..................................................
Available On-Screen Format Sizes Format (picture shape) availability based on Input/Signal INPUTS Standard Ant-A 000 Ant-B 000 DTV (480i/480p) DTV (1080i) Input-1 Input-2 Input-3 YES YES YES YES YES YES YES YES YES YES YES Component-1 or 2 (480i/480p) Component-1 or 2 (1080i) DVI (480i/480p) DVI (1080i) Expand 480i/480p YES YES YES NO YES YES YES YES NO YES NO Expand HD 1080i NO NO NO YES NO NO NO NO YES NO YES Zoom YES YES YES NO YES YES YES YES NO YES NO Stretch Plus Stretch YES YES YES NO Y
Available On-Screen Format Sizes, continued Widescreen Picture (16:9 - HD 1080i only) Example: A True HD Broadcast Standard (Recommended) HD Expand (Recommended for 4:3 images with Black Side Bars) Widescreen Picture (480i/480p) Standard (Recommended) Expand Zoom (For letterbox 2.
Operation of PIP and POP Picture Inside Picture (PIP) vs. Picture Outside Picture (POP) You have the option to view two TV shows or inputs at the same time. For example, you can watch a game show and a sports event on another channel, or a DVD movie and more. The PIP option allows you to view another input as a picture-inside-picture. The POP option allows you to view a main picture and another input as a side-by-side or three or nine pictures-outside-picture at the side (only one moving POP).
Appendix A: Bypassing the V-Chip Lock Bypassing the V-Chip Lock After you set the lock, you need your passcode to view a V-Chip locked program, view the locked TV, cancel the lock, or enter the V-Chip lock menus. If you forget your passcode, you can view the locked TV without entering your passcode. When your password is requested, press the number and QV buttons on the remote TV control at the same time. This process temporarily unlocks the TV.
This page intentionally blank 66
Appendix B: High Definition Input Connection Compatibility Component Inputs These inputs are compatible with most standard DVD and DTV signals with component video outputs. Compatible DTV signals are SDTV 480i, 480p, and HDTV 1080i. All other DTV signals, such as 720p, need to be converted by the DTV receiver to one of the compatible signal types. Please check the DTV receiver specifications before connecting.
Appendix C: Remote Control Programming Codes A/V Receivers Mitsubishi . .. .. . .. .. .. .. .. Admiral. .. .. .. Aiwa. .. .. .. .. B & K . .. .. .. Bose . .. .. .. .. Denon . .. .. .. . .. .. .. .. .. Fisher . .. .. .. Gerrard . .. .. .. Harman Kardon . Jensen . .. .. .. JVC . .. .. .. .. Kenwood . .. .. KLH . .. .. .. Koss . .. .. .. .. Magnavox . .. .. Marantz . .. .. McIntosh . .. .. Nakamichi . .. .. Onkyo . .. .. .. Optimus . .. .. Panasonic . .. .. Parasound . .. .. Philips . .. .. .. Pioneer . .. ..
Appendix C: Remote Control Programming Codes, continued Satellite Receivers /DBS/DTV Mitsubishi HD/Satellite Receiver Echostar/Dishnetwork Express Vu . .. .. . GE . .. .. .. .. . Gradient . .. .. . Hitachi . .. .. .. . Hughes . .. .. .. . Maganavox. .. .. . Panasonic . .. .. . Philips . .. .. .. . RCA/Proscan . .. . Samsung . .. .. . Sony . .. .. .. .. . Star Choice . .. . Toshiba . .. .. .. . . .. .. .. .. .. . Uniden . .. .. .. . WebTV . .. .. .. . .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..
Appendix D: Cleaning and Service Cleaning Cloth speaker grills: • Lightly brush with a soft brush cloth, or lint brush. Normally, light dusting with a dry, non-scratching duster will keep your TV clean. If cleaning beyond this is needed, please use the following guidelines: First, turn off the TV and unplug the power cord from the power outlet.
Appendix E: Diamond Shield™ Installation and Removal for Models WS-, WS- and WS- Follow the steps below to install and remove the Diamond Shield. INSTALLATION A. Begin by inserting the shield, sliding it into the channels, starting at the bottom. Gently bow the Diamond Shield toward you and insert the Diamond Shield into the top channel. B. Install the left and right molding clips by pressing them into the opening starting at a corner. Do not force the clip. The clip will slide into place.
Cabinet Separation for Model WS- ������������ ��� ���������� ��� ����� ��� ����� ������� �� ��� ���������� ���������� ������� ��� ���������� ������� ��� ������� ��������� ���� ���� ���������� ���������� ���������� ������� ��� ���� ��������� �� ��� ������� ����� ������ ��� �� ��������� �� ����� ��� ������ �������� ��� ������ ��������� ��������� ���� ���������� ���������� ������ ���� ��� ������ ��� ��� ���� ��������� ����������� ��� ����������� ��������� ������ �� ���� �� ���������� ���������� �������
Terminal Cover Ventilation for Model WT- AIR CIRCULATION TIP Wall When considering the location or position of your TV, we recommend you place it at least 2” (inches) away from the wall. Like most electrical equipment and appliances, better air circulation allows your television to run cooler, assuring a long, trouble-free life.
Troubleshooting Problem • The TV remote control does not work. • The TV takes several seconds to respond to channel commands. • You cannot access a channel. • On-screen displays appear each time you change a function. • You cannot program the TV to turn on automatically. • There is no sound even when the volume is turned up. • You have forgotten your lock passcode. • NetCommand® cannot learn a device after repeated attempts.
IMPORTANT NOTES Warning: Do not leave stationary PIP/POP, or letterbox images on the screen for extended periods of time. Mix the types of pictures shown. Uneven picture tube aging is NOT covered by your warranty. The normal use of a TV should include a mixture of TV picture types. The most frequently used picture types should fill the screen with constantly moving images rather than stationary images or patterns.
Index A A/V Memory Reset 58 Receiver, Connecting 17 Activating the PIP and POP 29 Advanced Convergence Menu 56 Advanced Features Menu 34, 53-57 Antenna Channel Edit Menu 45 Connecting 14,15 Appendices A: Bypassing the V-Chip Lock 65 B: High Definition Input Connection Compatibility 67 C: Remote Control Programming Codes 68 D: Cleaning and Service 70 E: Diamond Shield™ Installation and Removal for Models WS-48413, WS-55413 and WS-65413 71 Audio/Video Settings Menu 34, 58 A/V Memory Reset 58 Audio Output 58 T
L S Language Menu 36, 41 Lock by Time for WS-48413, WS-55413 and WS-65413 51 WT-42413 50 Lock Time for WT-42413 50 S-Video Audio, Connecting 16 Device, Connecting 18 Separate UHF and VHF Antennas, Connecting 14 Setting Up the V-Chip Lock Passcode 49 Setup Menu 33 Set Day Menu 39, 55 Set Time Menu 54 Side Panel Input/Output for WT-42413 12 Sleep Timer 26 Special Features 9 SQV™ Using the Menu Screen 47 Remote Control 47 Stereo Audio System, Connecting 17 M Main Menu Screens: Overview 33 Memorize Channels
NOTES 78
If you have questions regarding your television, please call our Consumer Relations advisors at (800) 332-2119 or send an email to: MDEAservice@bigscreen.mea.com To order replacement remote controls or an Owner’s Guide, please call our Parts Department at (800) 553-7278 or contact us through our web site at: www.Mitsubishi-tv.com © Mitsubishi Digital Electronics America, Inc. DB Printed in the U.S.A.
