Specifications

-
157
-
(b) Wireless remote controller
Indication section
FAN SPEED indicator
Indicates the selected blow rate.
ON-TIMER indicator
Indicated when ON-TIMER is set.
ROOM TEMP. indicator
Indicates set temperature.
AIR FLOW indicator
Indicates the condition of swing fl ap.
ON-TIMER setting time indicator
Indicates the ON-TIMER setting time.
Indicates nothing when ON-TIMER is not set.
OFF-TIMER indicator
Indicated when OFF-TIMER set.
OFF-TIMER setting time indicator
Indicates OFF-TIMER setting time. Indicates
the current time when the OFF-TIMER is not set.
OPERATION MODE indicator
Indicates selected operation with

lamp.
FILTER indicator
Indicates for 2 seconds when FILTER button
is pressed.
Operation section
FAN SPEED button
Every time when the button is pressed,
the mode is sequentially changed in
order.
HI
LO
MED
OPERATION MODE select button
The operation mode on the side of the

indicator is the currently selected
operation mode. It will switch in order.
ON-TIMER button
This button selects ON-TIMER operation.
OFF-TIMER button
This button selects OFF-TIMER operation.
TIME SET UP switch
This switch for setting the time.
ROOM TEMP. button
Press either the or
button to set the room temperature.
ACL switch
This is a switch to reset the microcomputer .
TIMER CANCEL button
This button cancels the timer settings.
FILTER button
Used to reset (turn off) the filter sign.
Press the button only after completing the
fi lter cleaning.
Signal sender
Signal are sent to the air conditioner
from here.
AIR FLOW button
Used to start or stop the swing fl ap.
ON/OFF button
When the button is pressed, the air con-
ditioner is started, and when the button is
pressed once again, it is stopped.
(FAN)
(AUTO) (COOL)
(DRY)
(HEAT)