Specifications

KX4/KXR4
36
SC-SLA2A-ER
SUPERLINK
®
Superlink® Control System - The Mitsubishi Heavy Industries centralized control system
The exclusive Mitsubishi Heavy Industries Superlink fast data transmission system is used to connect air
conditioning units in a network and keep them under control from a remote station, optimising the management
of small, medium and large surfaces.
With one or more Superlink lines its possible to manage up to a maximum of 48 units per line. The wide range
of individual and centralized controls, and the possible combined use, makes it possible to develop modular
systems, differentiated for each control zone.
A control panel can be wired into any point of the network line, guaranteeing the continuity of communication
between the indoor units and the controller.
The use of the Superlink reduces the overall section of the wires to install thanks to a cable with 2 non-polarized
wires; when designing the plant, this makes integrated planning simple, meaning a significant reduction in
installation costs.
SC-SLA2A-ER
It permits to start, stop and
monitor up to 48 indoor units.
It can also enable and disable
the single wired controllers.
SC-SLA3-ER/SC-SLB3-ER
Individual wired controllers
Multi-KX4 indoor units
Multi-KX4 indoor units
Individual wired controllers
Multi-KX4 outdoor unit
Multi-KX4 outdoor unit
Combined Multi-KX4
outdoor units
SC-WGW-AR
Connection with
3 wires between
indoor unit and
outdoor unit
Connection with
3 wires between
indoor unit and
outdoor unit
Connection with
3 wires between
indoor unit and
outdoor unit
Connection with 3
wires between
indoor unit and
outdoor unit
Super-link adaptor
(interface circuit board)
Super-link adaptor
(interface circuit board)
Super-link adaptor
(interface circuit board)
Super-link adaptor
(interface circuit board)
With wired control With IR remote control Without wired control
IR remote control
Network connection for Mitsubishi Heavy Industries RAC, PAC plants and systems.