Specifications

-
50
-
Thick line : moves quickly
Thin line : moves slowly
Stops at this position
for 5 seconds.
Thick line : moves quickly
Thin line : moves slowly
Stops at this position
for 5 seconds.
S STM model
Control the flap by AIRFLOW button on the wireless remote control.
(1) Air scroll
The flap will be automatically set to the angle of air flow best to operation.
s
During cooling and
t
dry operation
s
During heating
t
operation
(3) Memory flap
While the flap is operating if the AIRFLOW button is pushed once, it stops swinging at an angle.
As this angle is memorized in the microcomputer, the flap will be automatically set to the angle when next operation is started.
¡ Recommendable stopping angle of the flap
COOL•DRY
HEAT
(2) Swing flap
Flap moves in upward and downward directions continuously.
Horizontal
blowing
Slant forward
blowing
(4) When not operating
The flap closes, when operation has stopped.