Owners Manual

4. Insert a new fuse of the same capacity by us-
ing the fuse puller and insert the fuse at the
same place in the fuse block.
CAUTION
l
If
the newly inserted fuse blows again af-
ter a short time, we recommend you to
have the electrical system checked to find
the cause and rectify it.
l
Never use a fuse with a capacity larger
than that specified or any substitute, such
as wire, foil, etc.; doing so will cause the
circuit wiring to heat up and could cause
a fire.
To remove the cover (LHD vehicles)
E01006800066
1. Turn
the clips (A) anticlockwise, then re-
move the cover (B).
2. Remove
the fuse puller (C) from the cover (B).
To remove the cover (RHD vehicles)
E01006800079
1. Open the glove box.
2. Press the tab (A) and remove the cover (B).
3. Remove
the fuse puller (C) from the cover (B).
Maintenance
8-22
8
Presented by http://mmc-manuals.ru/ ©