Owners Manual

2. Pull out the connector (B) while pressing the
tab (C).
3. Undo
the clips (D) (4 locations) one by one
(pull each clip in the direction of the arrow),
and then remove the bulb holder.
4. Remove the bulb by turning it anticlockwise
while pressing in.
E- Rear turn-signal lamp
F- Stop lamp
5. To
install the bulb, perform the removal
steps in reverse.
NOTE
l
When mounting the lamp unit, align the pins
(G) on the lamp unit with the holes in the body.
5-door models
1. Remove the screws (A) (2 locations), and
then remove the lamp unit.
2. Push
the tab (B) inward with a straight blade
(or minus) screwdriver, and undo the lock in
the direction of the arrow (C), thereby free-
ing the rear combination lamp unit from the
connector.
Maintenance
8-28
8
Presented by http://mmc-manuals.ru/ ©