Owners Manual

Foot/demister position
Air flows to the leg area, the windscreen and the
door windows.
Demister position
Air
flows mainly to the windscreen and the door
windows.
“AUTO” position
The ventilators change to the following positions ac-
cording to the position of the temperature control di-
al.
Refer to “Temperature control dial” on page 6-04.
Temperature control dial posi-
tion
Ventilator
Between “C” and middle (•)
: Upper part
of the passenger
compartment
Middle (•) Set the dial to mid-
dle
(•) from the
“C” side
: Upper part
of the passenger
compartment
Set the dial to mid-
dle
(•) from the
“H” side
: Leg area
Between
middle (•)
and “H”
Near middle (•)
: Leg area
Near “H”
: Leg area,
windscreen and
door windows
CAUTION
l
When using the mode selection dial be-
tween the “ ”
and “
”
positions, pre-
vent fogging by pressing the air selection
switch to select outside air. (Refer to “Air
selection switch” on page 6-04.)
NOTE
l
With
the mode selection dial between the
“
”
and “
”
positions, the air flows main-
ly to the upper part of the passenger compart-
ment. With the mode selection dial between
the “
”
and “
”
positions, the air flows
mainly to the leg area.
l
With the mode selection dial between the
“
”
and “
”
positions, the air flows main-
ly to the leg area. With the mode selection di-
al between the “
”
and “
”
positions, the
air flows mainly to the windscreen and door
windows.
Air conditioning
E00700500465
The
air conditioning can only be used when the
ready indicator is illuminated.
NOTE
l
If the energy level gauge is at 0 bar, the vehi-
cle interior cannot be cooled/heated even
though the dial or switch is operated. Further-
more, the demist performance is also re-
duced. Refer to “Energy level gauge” on
page 4-06.
Control panel
E00700600567
A- Temperature control dial
For pleasant driving
6-03
6
Presented by http://mmc-manuals.ru/ ©