Owners Manual

NOTE
l
When
disconnecting the joint, be careful not
to damage surrounding parts.
7. While keeping the bumper flipped up, re-
move the side fixing bolt (G).
8. Remove the front fixing bolt (H).
9. As shown in the illustration, shift the entire
headlamp unit upward and then unlatch the
tab (I) on the upper part of the headlamp to
remove it from the vehicle.
NOTE
l
Do
not force the headlamp off the vehicle as
doing so could damage the tab.
To install
The
mounting brackets on the headlamps are en-
graved with the numbers to . Install each
branch in the order of the assigned numbers.
1. As
shown in the illustration, insert the cut
out area (A) on mounting bracket
on to
the
bolt (B) remaining on the vehicle body,
and latch the tab (C) on the fixture hole (D)
to install the entire headlamp unit to the vehi-
cle body.
Vehicle care and Maintenance
8-26
8
Presented by http://mmc-manuals.ru/ ©