Owners Manual

NOTE
l
Use
the work hole (E) on the deck garnish to
confirm that the tab (C) on the upper part of
the headlamp is firmly fixed in place.
Upper part of headlamp
2. Make sure that the tip (F) of the mounting
bracket is hooked on the body edge (G).
3. Make
sure that the pin (H) is inside the hole
on the mounting bracket
.
4. Firmly tighten the headlamp mounting bolts
in the following order: to .
5. After
pressing down on the bumper and fend-
er joint from above to fit it in, fix it in place
with the clip.
NOTE
l
Secure
the bumper clip by first inserting it in-
to the mounting hole and then pressing the
centre (I) of the clip in.
Vehicle care and Maintenance
8-27
8
Presented by http://mmc-manuals.ru/ ©