Owners Manual

ManualsBrandsMITSUBISHI ManualsAutomotiveMitsubishi i-MiEV 2011 Owners Manual.pdf

Folding the seatbacks forward

E00401600330

Larger

objects can be loaded into the vehicle if a

seatback is folded forward.

CAUTION

not stack luggage in the vehicle higher

than the seatback height. Also, firmly se-

cure the luggage.

Serious accidents could result due to un-

restrained objects entering the passenger

compartment during sudden braking.

To fold

Pull the lever, and fold the rear seatbacks forward.

NOTE

not operate the lever in the wrong direc-

tion.

Doing so could damage the lever and make it

impossible to operate the seatback.

To replace

1. Raise

the seatback until it locks securely into

place.

2. Push lightly on the seatback to confirm that

it has actually been secured.

Rear seat cushion

E00401900173

The rear seat cushion can be removed. It is re-

moved

when the tyre repair kit stored under the

seat cushion is taken out. Use this function when

putting the seat covers on, etc.

To remove

1. Pull the seat stoppers (A) to unlock the seat

cushion (B).

2. Lift up the seat cushion and pull it towards

you to remove it.

To install

1. Place

the seat belt’s buckles on top of the

seat cushion.

2. Pushing the seat cushion as far back as possi-

ble,

press the hooks (A) on the underside of

the seat cushion into the right and left stop-

per installation holes (B) until a click is heard.

3. After

installing the seat cushion, shake it light-

ly to check that it is properly fixed in position.

Seat and seat belts

3-06