Owners Manual

Adjusting the display brightness
E00519300034
The display brightness can be adjusted at 13 levels
for both daytime and nighttime.
l
BRIGHTNESS FOR DAY TIME
The display brightness is adjusted when the
light switch is in the “OFF” position.
l
BRIGHTNESS FOR NIGHT TIME
The display brightness is adjusted when the
light switch is in the “ ” or “ ” position.
1. Press the “ADJ” button to show the bright-
ness adjusting display.
2. Press the “←” or “→” function button to se-
lect the setting you wish to adjust (daytime
or nighttime). Then press the “SELECT” func-
tion button.
3. Use the function buttons to adjust the bright-
ness.
“+”- To make the display brighter
The display becomes brighter by one
step, every time you lightly press the
“+” function button. If you continue press-
ing the button for about 2 seconds or
more, the indication is fast-forwarded.
“-”- To make the display darker
The display becomes darker by one step,
every time you lightly press the
“-” function button. If you continue press-
ing the button for about 2 seconds or
more, the indication is fast-forwarded.
“SET”- To set the brightness
Press function button “SET” to set the
new brightness. The display will flash
twice.
NOTE
l
If
you next wish to adjust the other adjust-
ment setting (daytime or nighttime), press
the “ADJ” button or “BACK” function button.
4. After adjustment, press the “INFO” button to
select the information display.
Instruments and controls
3-20
3
OCRE12E1
Presented by http://mmc-manuals.ru/ ©