Owners Manual

NOTE
l
If
the battery terminals are disconnected, the
settings for the date and time may be erased.
If this happens, please set the date and time
again.
Adjusting the barometer
E00524400033
It is possible to adjust the barometer indication and
return it to the factory setting.
NOTE
l
It is not necessary to adjust the barometer be-
cause it has been adjusted at the factory.
However, if you wish, adjust
it using an accu-
rate barometer.
To adjust the barometer
1. Press the “ADJ” button to
select the barome-
ter adjustment display.
2. Press the “←” or “→” function button to se-
lect the “BAROMETER ADJUST”
display.
Then press the “SELECT” function button.
3. Adjust the barometer by pressing the func-
tion buttons.
“+”- To adjust the barometer
Each gentle press of the
“+” function but-
ton will increase the indicated barometer
by 2 hPa. If you continue pressing the but-
ton for about 2 seconds or longer, the in-
dication is fast-forwarded.
“-”- To adjust the barometer
Each gentle press of the “-” function but-
ton will decrease the indicated barometer
by 2 hPa. If you continue pressing the but-
ton for about 2 seconds or longer, the in-
dication is fast-forwarded.
“SET”- To set the barometer
Press the “SET” function button. The dis-
play will flash twice, and the new setting
will be established.
NOTE
l
You
can return to the previous display by
pressing the “BACK” function button.
Instruments and controls
3-28
3
OCRE12E1
Presented by http://mmc-manuals.ru/ ©