Owners Manual

ManualsBrandsMITSUBISHI ManualsAutomotiveMitsubishi L200 2011 Owners Manual.pdf

121

122

123

124

125

126

127

128

129

130

If the blades are frozen to the windscreen, do not

operate the wipers until the ice has melted and the

blades are freed, otherwise the wiper motor may be

damaged.

MIST- Misting function

The wipers will operate once.

OFF- Off

AUTO- Auto-wiper control

Rain sensor

The wipers will automatically operate

depending on the degree of wetness on

the windscreen.

LO- Slow

HI- Fast

Rain sensor

Can only be used when

the ignition switch is in the

“ON” position.

If the lever is put in the “AUTO” position, the rain

sensor (A) will detect the extent of rain (or snow,

other moisture, dust, etc.) and the wipers will oper-

ate automatically.

Keep the lever in the “OFF” position if the wind-

screen is dirty and the weather is dry.

Wiper operation under these conditions

can scratch

the windscreen and damage the wipers.

CAUTION

With the ignition switch in the “ON” posi-

tion and the lever in the “AUTO” posi-

tion, the wipers may automatically oper-

ate in the situations described below.

If your hands get trapped, you could suf-

fer injuries or the wipers could malfunc-

tion. Be sure to turn the ignition switch to

the “OFF” position or move the lever to

the “OFF” position to deactivate the rain

sensor.

• When cleaning the outside surface of

the windscreen, if you touch the rain

sensor.

• When cleaning the outside surface of

the windscreen, if you wipe with a

cloth the rain sensor.

• When using an automatic car wash.

• A physical shock is applied to the wind-

screen.

• A physical shock is applied to the rain

sensor.

NOTE

protect the rubber parts

of the wipers, this

operation of the wipers does not take place

when the vehicle is stationary and the ambi-

ent temperature is about 0 °C or lower.

Do not cover the sensor by affixing a sticker

or label to the windscreen. Also, do not put

any water-repellent coating on the wind-

screen. The rain sensor would not be able to

detect the extent of rain, and the wipers

might stop working normally.

In the following cases, the rain sensor may

be malfunctioning.

Instruments and controls

3-37

OCRE12E1